Firmware, D-Series
Firmware
Naming Conventions
The releases are named / numbered in the format:
MAJOR_MINOR_BUGFIX_MODEL_firmware.eff, e.g.
2_9_22_D65_firmware.eff
Phone Firmware Downloads
Sangoma D-Series Phone firmware releases are made available, outside of general platform use in Sangoma's UC/UCaaS platforms at the following download location:
http://phones.dl.sangoma.com/firmware/asterisk/
Older packages in tar.gz format are no longer provided.
Firmware Releases and Changes
2_9_26
October 31, 2023
Issues Resolved:
Correct calling issue that can occur with low-MTU connections
Correct regression introduced in 2_9_22 that caused D6x model telephones to inadvertently send a SIP code 486 when in DND mode while status application configuration did not specify such behavior
Correct long-standing issue exposed by changes made in 2_9_24 and 2_9_25 that caused a failure to initially light the headset audio path indicator LED on first press on an incoming call
New Features:
None
Improvements:
None
MD5 Sums
1081d0f513ffaf2886afa73256d59d47 2_9_26_D40_firmware.eff
0e245ecaebc34ce7a392ab4f083dee44 2_9_26_D45_firmware.eff
351a3f55fdb81ea8933743869745c98e 2_9_26_D50_firmware.eff
e38ef382495fb1081807c13b6f2163b8 2_9_26_D60_firmware.eff
6dcf1466d1349bb1cbea16dfa2898d97 2_9_26_D62_firmware.eff
d211a770633b677ba8bae8d262d77924 2_9_26_D65_firmware.eff
954ccb996ae17604720d7b932aee1e2b 2_9_26_D70_firmware.eff
2_9_25
June 15, 2023
Issues Resolved:
Correct improper checking of VLAN id in phone web UI if LLDP mode is enabled
Correct improper "Start" translation for multicast broadcast screen, D6x models
New Features:
Add support for honoring three new SIP headers on an incoming invite:
Alert-Info-Ring-Volume=(1-10) - ignore local device ring volume setting, and use the value in this header
Alert-Info-Speaker-Volume=(1-10) - ignore local device speaker volume setting, and use the value in this header
Alert-Info-Interrupt=1 - Automatically put any current call on hold, auto-answer the call and play audio through speaker or through headset if it's already off-hook, similar to what is done with the priority and interrupt options of multicast
Improvements:
Enable use_secure_labels by default
Use action IDs instead of action names to filter transfer actions in Contact Info screen
Allow telephone to parse zero as an acceptable character for a NAT keep-alive method
Update certain system libraries
MD5 Sums
5c227ba4b09f37d97720eb3edc0f9272 2_9_25_D40_firmware.eff
60e57d255b3f64eb22f9f9b5ff158f92 2_9_25_D45_firmware.eff
aa5c2d5e6542638454ba5f845ae71949 2_9_25_D50_firmware.eff
a2171a123f2a665e135a51f2e6c4c291 2_9_25_D60_firmware.eff
0c2647c7c4a107e8501a45ded1850fe8 2_9_25_D62_firmware.eff
15110db55181a5d0c074656accbe29b0 2_9_25_D65_firmware.eff
576cc92f01a8b024aac783dd04f54b56 2_9_25_D70_firmware.eff
2_9_23_4
April 11, 2023
Issues Resolved:
Improve LLDP-MED detection for Meraki and similar switches
New Features:
None
Improvements:
None
MD5 Sums
fc25691f28ea8dfb72d8ae73badd4507 2_9_23_4_D40_firmware.eff
90d0fbec58ee6139f1bf019887efd6b8 2_9_23_4_D45_firmware.eff
d3b63c691d3d2d6a702c9b0c60b11255 2_9_23_4_D50_firmware.eff
ccad53f0ad07d4751ef2cbb49fe46c50 2_9_23_4_D60_firmware.eff
7c76f26f0b2440e3fe13dd2a2bbe8492 2_9_23_4_D62_firmware.eff
5e544e54987c672ff6290a2acdbf5910 2_9_23_4_D65_firmware.eff
5b600b5cda018b13f45bf4a46b2fb82e 2_9_23_4_D70_firmware.eff
2_9_23
September 26, 2022
Issues Resolved:
Correct improper parsing of certain BLF Item phone states that resulted in a phone crash
New Features:
Implement remote call control via in-dialog NOTIFY talk and hold events, D6x only
Improvements:
Improve representation of on-screen graphics resulting in file system and memory savings, D6x only
Update Sangoma logos, D6x only
MD5 Sums
850e6a8e1f03f1c0e7d51e95ccc1f5ce 2_9_23_D40_firmware.eff
b4ff132903b2f807a3ddf85f2cec7be2 2_9_23_D45_firmware.eff
8ebca28732e57ce277c0fbb68a40d8d1 2_9_23_D50_firmware.eff
24f860ce32d870edfc5f0e757d6871b3 2_9_23_D60_firmware.eff
7c2ea6920f757fe65d0cf8dba3671ff7 2_9_23_D62_firmware.eff
6297330e92ac226b5fd045748f759e8e 2_9_23_D65_firmware.eff
98bd38560c4d1b8f149d7647ecc01fdc 2_9_23_D70_firmware.eff
2_9_22
August 11, 2022
Issues Resolved:
Correct failure of call log app when using server-supplied call log entries void of the viewed attribute
Correct failure of EXP150 expansion modules to properly follow the main phone's brightness and dimming rules, D65 only
New Features:
Add multicast paging broadcast app, accessible from the app screen or a rapid dial key, D6x models only
Improvements:
Improve LLDP behavior to account for certain switches that require low TTL to initiate timely LLDP packet generation on boot and increase discovery period
Ensure all accounts are in a DND status when DND is set from the Status app in simple app mode, D6x models only
MD5 Sums
c16d651bd9d3abfa5bc8be088cff3b70 2_9_22_D40_firmware.eff
53663f73faec12376876987cd1092593 2_9_22_D45_firmware.eff
18c84f9612f77a3a1f1f7ea4445f3f72 2_9_22_D50_firmware.eff
d0a6ce1da0ebfc33a16dc28886e6e275 2_9_22_D60_firmware.eff
10f987ad18865677d7927c2c272fa63c 2_9_22_D62_firmware.eff
7febecb919a88476493b9519789b8b70 2_9_22_D65_firmware.eff
78db319b6d56789b4cf976eda86d71a0 2_9_22_D70_firmware.eff
1_12_14
Internal Date - July 18, 2022
Issues Resolved:
Account for change in Switchvox RTAPI login procedure introduced in 7.9
New Features:
None
Improvements:
None
MD5 Sums
4a257b304ff3129e7274064bac6f416e 1_12_14_D80_firmware.eff
1_12_13
June 1, 2022
Issues Resolved:
Correct improper resolution of phone service during boot sequence that resulted in significant delays for non-Internet-connected units
Correct various SIP stack parsing issues
New Features:
None
Improvements:
None
MD5 Sums
beda3cbdcc09171ab13f3b5acd41f5a7 1_12_13_D80_firmware.eff
2_9_21
May 26, 2022
Issues Resolved:
Correct regression causing phone app crash when executing Dial soft key from Call Log Detail screen
Correct error causing blank soft keys when canceling the Filter popup in the Call Log app
New Features:
None
Improvements:
None
MD5 Sums
3e8b9cee395a6de3e449ba05bdc8a63e 2_9_21_D40_firmware.eff
8918a686fdf564df12330d115a2e4c3d 2_9_21_D45_firmware.eff
f54a987a59b50e644a454e064270679a 2_9_21_D50_firmware.eff
267ad3c6b1dfe3b20ca1307723ff30d6 2_9_21_D60_firmware.eff
5089286092cc92e57d7d15cd3ad0b81e 2_9_21_D62_firmware.eff
d9184d4b62367c857d456995bb1bde1d 2_9_21_D65_firmware.eff
789ff2486cbdff7e23e55a189aa7b60e 2_9_21_D70_firmware.eff
2_9_20
May 19, 2022
Issues Resolved:
Correct SIP stack issue with parsing improperly crafted DNS packets
Enter call log app using correct account on a multi-line phone when entering from the Account Info screen
Correct improper behavior when joining two calls into conference when an outbound proxy is in use
Correct timing issue that presented failure when attempting to filter call logs while retrieving calls from the call log API
Correct improper behavior when firmware elements without a model identifier are parsed
Correct improper behavior in the WebUI given improper account setup in the phone's running configuration
New Features:
Allow host-based configuration of MWI subscriptions, D6x only
Allow period config re-check for phones configured using cURL, not DPMA, method, D6x only
Improvements:
Preserve additional network setup logging information for use by Sangoma Technical Support
Fully remove old LogOut app
MD5 Sums
6f8cff06ba70494c72bfed9a9c992bd0 2_9_20_D40_firmware.eff
40752a2808c89233d429e9883063f540 2_9_20_D45_firmware.eff
a30c495832f68dd556745b9175c0408c 2_9_20_D50_firmware.eff
53186c35abdcfd3d64c61d2f2a1b8368 2_9_20_D60_firmware.eff
0b3f6d5bb49b348636ea5d13e4640220 2_9_20_D62_firmware.eff
dc9f3796ffbf807d50d3fcf9e205da4f 2_9_20_D65_firmware.eff
edc1eb7276644c93388843c42cca4ae5 2_9_20_D70_firmware.eff
2_9_19
Feb 22, 2022
Issues Resolved:
Correct failure to preserve certain local phone configuration settings when phone is configured via cloud provisioning
New Features:
None
Improvements:
None
MD5 Sums
aa21a1c6a4406aa3f07f097e87929baa 2_9_19_D40_firmware.eff
c083f73b9b7760710c5433e82ea45f8b 2_9_19_D45_firmware.eff
3334f75f7cd747a89844165d17358628 2_9_19_D50_firmware.eff
7ccd6dd2f42c6af19c7f4d38188ca6bd 2_9_19_D60_firmware.eff
dc11b7e762ee64b87718d0cfd494ee19 2_9_19_D62_firmware.eff
3df29f2af854793a78fba5d02efd2d9c 2_9_19_D65_firmware.eff
67a4b43e74f5f41cef5196107836432d 2_9_19_D70_firmware.eff
2_9_18
Feb 14, 2022
Issues Resolved:
Correct issue responding to redirection command on networks slow to provide network connectivity
Correct issue updating the settings in the Preferences/Sound Settings menu when changing a volume setting when Reset Volume After Each Call is set to no
New Features:
Implement a configuration menu item under the Advanced screen that allows for resetting only the UI-related configuration items
Support transmission of setLastViewed API call to supporting servers when viewing server-stored call logs to help support synchronization of viewed, missed calls across devices
Improvements:
Prevent enabling of BT functionality on model D65 telephones that do not have BT hardware
MD5 Sums
1a0ce20b651710b52c881f35c9ee559f 2_9_18_D40_firmware.eff
e9a55aa0d9b235e45de3aaa6e879d2e9 2_9_18_D45_firmware.eff
acea928c44c5966967de944d402d5bc0 2_9_18_D50_firmware.eff
638fbba4127b34f02f09012646e53ade 2_9_18_D60_firmware.eff
fd84a08edde447a98f52ee28e88b8b60 2_9_18_D62_firmware.eff
55b30a8f2e76f7ac953978295826db82 2_9_18_D65_firmware.eff
c94eb0b0ca3adedc93d536ea60d89518 2_9_18_D70_firmware.eff
2_9_17
Dec 3, 2021
Issues Resolved:
Correct occasional issue with SRTP decoding at the beginning of a call
New Features:
None
Improvements:
Update timezone database to 2020a version
Improve handling of 486 busy by providing call screen status message of "Busy" and presentation of Normal busy tone instead of Congestion
Remove extraneous blind transfer options in Contact Screen details page when certain conditions are met
MD5 Sums
0e8a50ef2410990302f7fa623932cf77 2_9_17_D40_firmware.eff
c322c3e8f0b2810f4df2a85a7d6e5c74 2_9_17_D45_firmware.eff
a919b46c13ea2d9c08be0a7ee8843437 2_9_17_D50_firmware.eff
1154f1ed78be1366e5e8765775deadd3 2_9_17_D60_firmware.eff
7e6df91c747c087322c92db07369fe9c 2_9_17_D62_firmware.eff
98805a0381fc5b98777a47ba9452bb2e 2_9_17_D65_firmware.eff
ba449788571b8504ce1c24f879bd20c2 2_9_17_D70_firmware.eff
1_12_12
Oct 11, 2021
Issues Resolved:
None
New Features:
None
Improvements:
Update certificate store
MD5 Sums
cd2995c7fb9d1f5f0865eeca2feb3463 1_12_12_D80_firmware.eff
2_9_16
Oct 4, 2021
Issues Resolved:
None
New Features:
None
Improvements:
Update certificate store
MD5 Sums
21e47663cce25a4410ee3edc3c1931ed 2_9_16_D40_firmware.eff
225196b2989e89bd74105bccef86ca24 2_9_16_D45_firmware.eff
e5e293c9bcfd9e5406bab6d22685535f 2_9_16_D50_firmware.eff
c3191e48d64abc2386e4218759edfe9a 2_9_16_D60_firmware.eff
8ab60bd751ebe1b092fb6afd98f8ccbf 2_9_16_D62_firmware.eff
fe199415a9b45c0b6370d0b5ee0cdcd7 2_9_16_D65_firmware.eff
c969aa5569196e6cb1918974e6343eab 2_9_16_D70_firmware.eff
2_9_15
Sep 7, 2021
Issues Resolved:
Correct failure to honor the Cancel hard key and the "X" line key when editing SIP lines from the UI, additionally replace erroneous use of "Cancel" instead of "Back" when in the same screen
Correct erroneous double-counting of waiting messages when both normal and urgent new messages are presented in the NOTIFY
Correct English-language misspelling in SSL Authentication error message
Correct occasional crash when displaying server URL during config fetch boot screen
Correct failure to properly display MWI count in some instances against Business Voice servers
New Features:
Add new Web UI page, accessible at /configserver that allows configuration and re-configuration of the phone's Sangoma Configuration Server URL or specification of the phone's Fetch Configuration From settings. When configuration is made via this screen, network, 802.1X, and SSL settings are preserved, but other phone settings are overwritten
Provide plumbing necessary to support Business Voice provisioning
Allow configuration of MWI URI using the account parameter mwi_subscription_uri, D6x models only
Allow host-specific outbound proxy definition as well as definition of outbound proxy transport, D6x models only
Improvements:
Improve boot screen logic to show "Booting Phone" instead of "Launching Phone"
Prevent unnecessary restarts in some instances by removing the enable_ice and stunaddr settings from the list of restart conditions for a D6x model telephone as those settings are not supported by those models, D6x models only
Address cosmetic issue in boot config localization screen
MD5 Sums
549fd69025717c70732236303975e751 2_9_15_D40_firmware.eff
dba26175d77963333dcee9be1d5b3a3d 2_9_15_D45_firmware.eff
f0e1ddab36686be44d1d8e4d2c57d372 2_9_15_D50_firmware.eff
3766622c298f7db81bd723ee4cd1a834 2_9_15_D60_firmware.eff
742e8d1abe82464a6f4166a855977ff4 2_9_15_D62_firmware.eff
d4df9f8aed120677ff0848986050d571 2_9_15_D65_firmware.eff
ed56d4be573a302e4c9a3751f270a889 2_9_15_D70_firmware.eff
2_9_14
June 14, 2021
Issues Resolved:
Correct a token authorization regression introduced in 2_9_13
New Features:
None
Improvements:
None
MD5 Sums
875c40c4a421a2e99989fc984624d2ce 2_9_14_D40_firmware.eff
2c6fbd3dba1792d5e1cfb90dc47f79d7 2_9_14_D45_firmware.eff
4231cdbbd9f34e3bd79f054fe415c78c 2_9_14_D50_firmware.eff
2219cfb9509aeb1259f04b90b8e4103f 2_9_14_D60_firmware.eff
f50ff5e9d998f91087f0673cd583edab 2_9_14_D62_firmware.eff
37a9a431dbeacd44311a6405a0f05751 2_9_14_D65_firmware.eff
a813e0e1e71b60eee581db61a7a20399 2_9_14_D70_firmware.eff
1_12_11
May 27, 2021
Issues Resolved:
None
New Features:
Allow wildcard TLS certs by default
Allow configuration of RTAPI server URL
Improvements:
None
MD5 Sums
c80af6e0218b9c95aec915c9cc856610 1_12_11_D80_firmware.eff
2_9_13
May 27, 2021
Issues Resolved:
Correct improper transmission of return characters in phone service reporting
New Features:
Allow wildcard TLS certs by default
Improvements:
Improve logging for certain hot desk situations
Improve Logout translation strings
MD5 Sums
9a60bd07ed8e039ea847438b24055336 2_9_13_D40_firmware.eff
dba7c22ac53d05368b9489ca6929f0ab 2_9_13_D45_firmware.eff
3a552f6b24fce58017a4e140ca9d5fe1 2_9_13_D50_firmware.eff
9bd7ee54ea08b6bde5a25eaa7e0038a8 2_9_13_D60_firmware.eff
c8ad1111d38381e895806945b2af5c89 2_9_13_D62_firmware.eff
ef3389adcfcb6ebd93eccf9bcbf5f14a 2_9_13_D65_firmware.eff
12f8934a9ee56dfc09f7bdb2accef8c5 2_9_13_D70_firmware.eff
This firmware provides a change in default phone behavior. In previous versions, wildcard certificates for SIP TLS connectivity were not allowed by default, in accordance with SIP standards. Because this has created a problem in practice, we are reversing this behavior. For this firmware and forward, wildcard certificates will be allowed for SIP TLS connectivity.
2_9_12
May 27, 2021
Issues Resolved:
Correct error with unending appending of MAC if appending to user-agent is enabled
Correct error in handling fetch of call logs via proxy, introduced in 2.9.10
Correct an intermittent issues with D6x phones while removing the Config Updating banner
Correct an error in advertising the Opus codec that was introduced in a previous release, D6x models only
New Features:
Add support for new hot-desking application, D6x models only
Allow toggle of the DND soft key in simple mode
Add "Duration" to the Parking app, D6x models only
Improvements:
Default Opus encoding to variable bitrate mode (VBR) instead of constant bitrate mode (CBR), D6x models only
Remove credentials from AE syslogs
Remove "Digium Switchvox" from idle screen company text for Switchvox-mode phones
Support updated EXP150 firmware feature to match long-press time for D6x phones
Support updated EXP150 firmware feature that supports BLF page timeout
Remove unused LogOut application
MD5 Sums
469baf3df7862bd49b2887b2f048d864 2_9_12_D40_firmware.eff
b15dc736d747571c09632a30e2ec816d 2_9_12_D45_firmware.eff
1f192599c1644d8fae5d9ed40583da08 2_9_12_D50_firmware.eff
cd4a2a8d5de373d74f7e174fee6d66a5 2_9_12_D60_firmware.eff
416cf715112ccbf484ac519f9aec80ea 2_9_12_D62_firmware.eff
31e3a739d74e33f126203c5b34a579a5 2_9_12_D65_firmware.eff
137a3fcbf54c6a9d652bc2e2949b2e76 2_9_12_D70_firmware.eff
2_9_10
January 6, 2021
Issues Resolved:
Correct improper Contacts app header label
Address potential memory corruption
Correct failure to apply proper prefix for Call Log API requests
New Features:
None
Improvements:
Update numerous behaviors
MD5 Sums
cff757f66c9b1c80f6afb57e22292d68 2_9_10_D40_firmware.eff
70255dd07faa720c1c18e99a686638f2 2_9_10_D45_firmware.eff
a3ded6e4467eecf84b5fe72fafcc59c9 2_9_10_D50_firmware.eff
da0880ab10b257ada8fa2e8c38e972c1 2_9_10_D60_firmware.eff
2d98c2b0ff383147e46c4956aef95346 2_9_10_D62_firmware.eff
73484459964d50e071827304c3b0545a 2_9_10_D65_firmware.eff
b2c97165c212b599bde9c9ea3c1e693f 2_9_10_D70_firmware.eff
1_12_10
January 6, 2021
Issues Resolved:
None
New Features:
None
Improvements:
Update numerous behaviors
MD5 Sums
6d76aed48a3f9cab4f64a3f41662929a 1_12_10_D80_firmware.eff
2_9_9
July 10, 2020
Issues Resolved:
Correct failure to properly connect to Tech Support server
New Features:
None
Improvements:
None
MD5 Sums
d2975d08d25d6f9d3e8ad7b80f419951 2_9_9_D40_firmware.eff
e4cdb8ed733d51147739b96c793bf314 2_9_9_D45_firmware.eff
347ef358567b166dadaf427abec7ad86 2_9_9_D50_firmware.eff
8c941590dd8ab6042a99f8c40f3deeba 2_9_9_D60_firmware.eff
88801ba1f827d998b153cddfedb8a58b 2_9_9_D62_firmware.eff
becc1f592dc5340d46dcb1f727c9d133 2_9_9_D65_firmware.eff
777038f3b22117407dbf8f3e2e9162ed 2_9_9_D70_firmware.eff
1_12_8
July 10, 2020
Issues Resolved:
Correct failure to properly connect to Tech Support server
New Features:
None
Improvements:
None
MD5 Sums
e61232e63f748f8fed17f923a7511a5e 1_12_8_D80_firmware.eff
2_9_8
June 10, 2020
Issues Resolved:
Remove expired AddTrust root CA
New Features:
None
Improvements:
None
MD5 Sums
bc29e98566637def002d53b22b56150e 2_9_8_D40_firmware.eff
892d921bf35bafcfaa299e137cf92a00 2_9_8_D45_firmware.eff
5407ab9a30a85489f689e405df30c925 2_9_8_D50_firmware.eff
a65111f09546c256feb1bd352194ca33 2_9_8_D60_firmware.eff
4bf17b1aa212e647176203510ec38a9e 2_9_8_D62_firmware.eff
011f9f145a858606a3dc4b479936297d 2_9_8_D65_firmware.eff
bddecf70abcdbc349d301ab9bedec52a 2_9_8_D70_firmware.eff
1_12_7
June 10, 2020
Issues Resolved:
Correct incorrect 802.1X labels within bootconfig menu
Remove expired AddTrust root CA
New Features:
None
Improvements:
None
MD5 Sums
093113f4234762653feb7bbe4fa25ae7 1_12_7_D80_firmware.eff
1_12_6
May 27, 2020
Issues Resolved:
Correct occasional time offset issue when utilizing Switchvox Call Log API
Mitigate occasional issue with marginal DC power supplies
New Features:
None
Improvements:
None
MD5 Sums
9e99ba3932ea50eeed147d603834b440 1_12_6_D80_firmware.eff
2_9_7
May 20, 2020
Issues Resolved:
None
New Features:
None
Improvements:
Allow a definition of 0 for the backlight dimming level to completely shut off the LCD backlight for D6x models. Further, when the phone is dimmed to 0, reconfiguration functions processed by the phone will not cause the backlight to turn on.
MD5 Sums
167de91ab0d3a70f8bf132074ff11d83 2_9_7_D40_firmware.eff
708d79577b8c61c00a70e2b126386a15 2_9_7_D45_firmware.eff
9c6428a9557c6b0d5b8288b908bf5c89 2_9_7_D50_firmware.eff
c9764540676682aaf5bd0152cb15ec1d 2_9_7_D60_firmware.eff
2bcd00185c4bcc1ced212262d04ef5ea 2_9_7_D62_firmware.eff
553c9a1239e6d5dc060b7bb5ca3fc517 2_9_7_D65_firmware.eff
b39cac65fba2c748b35a106aaae53d66 2_9_7_D70_firmware.eff
1_12_5
March 24, 2020
Issues Resolved:
None
New Features:
Allow Call Log API host to be specified differently from the primary account's host
Improvements:
None
MD5 Sums
d82749cdb55abb239e1e6d90945118cf 1_12_5_D80_firmware.eff
2_9_6
March 20, 2020
Issues Resolved:
Correct error in preserving UI-entered 802.1X settings across a server reconfigure
New Features:
Allow Call Log API host to be specified differently from the primary account's host
Improvements:
None
MD5 Sums
d95695bd8bddc1a7ba8755213000743d 2_9_6_D40_firmware.eff
013097eab167cfdbd68e52de4f363fa1 2_9_6_D45_firmware.eff
bd46b03ffc36384ffd29f476c06d33c4 2_9_6_D50_firmware.eff
8814ca668dad3343b73f95e16b4e1ecc 2_9_6_D60_firmware.eff
26fc11d8df25742112c3a434439db09c 2_9_6_D62_firmware.eff
f7e3a0ddbdcea21e421cf906355aba78 2_9_6_D65_firmware.eff
f309cf5164ecf47d7ba024cd91daf705 2_9_6_D70_firmware.eff
1_12_4
March 10, 2020
Issues Resolved:
None
New Features:
Add new setting (prefer_dialpad_over_incoming) to allow phone to preserve dial pad in the foreground during an incoming call while in the transfer state
Improvements:
None
MD5 Sums
d684cc4d281cd2c7bce94993ef4ec109 1_12_4_D80_firmware.eff
1_12_3
March 5, 2020
Issues Resolved:
None
New Features:
Add new option for multicast listener interrupt_callers parameter to allow phone to ignore listener if phone is engaged in an in-process call
Allow long-press of 0 to affect a + for first character dialed
Improvements:
None
MD5 Sums
e807e67713e1ee82e913a516b2ab162e 1_12_3_D80_firmware.eff
2_9_5
March 4, 2020
Issues Resolved:
None
None
New Features:
Add new option for multicast listener interrupt_callers parameter to allow phone to ignore listener if phone is engaged in an in-process call
Improvements:
None
MD5 Sums
9dc1cfe47dbd3d20a504f5c6be20c000 2_9_5_D40_firmware.eff
a3346d1d5c1cc419080afd282b5bb03b 2_9_5_D45_firmware.eff
5a4d44666b19545c519d8d9605c714db 2_9_5_D50_firmware.eff
c72455028dbcbdf8f48bc42655a84c5e 2_9_5_D60_firmware.eff
e3e9e105123da370fb186d15b8f3c249 2_9_5_D62_firmware.eff
06b2a1c0c309bd9444c1a68e1207e7db 2_9_5_D65_firmware.eff
2e1793d14d2ef550836cc9f7a4d1b83d 2_9_5_D70_firmware.eff
2_9_4
February 7, 2020
Issues Resolved:
Correct erroneous behavior with long-running incoming SRTP-enabled calls
Correct an issue that caused SRTP-enabled calls to become increasingly likely to present white-noise following re-INVITEs beyond 10-minutes
New Features:
None
Improvements:
Disable PC Port VLAN support on a D65 if an EXP150 module is attached
Automatically adjust RTP port ranges on a D65 if an EXP150 module is attached to prevent possible overlapping of UDP ports 10024, 10025, and 10026, which are blocked at the WAN port for inbound traffic due to the EXP150 module's architecture.
Forcibly disable ICE support on D6x models to prevent misuse of ICE enabling configuration parameters that are presently functional on the D80.
Update to new public CA bundle (January 1, 2020)
MD5 Sums
73be0022139b7bedf13c99ab9a0f99f9 2_9_4_D40_firmware.eff
e08e7fdc87197acce339bacc804ebf1e 2_9_4_D45_firmware.eff
9a83a9edebc05e7c1c2aa144f46d836c 2_9_4_D50_firmware.eff
48c669eeced3851feacf21cd498c54f2 2_9_4_D60_firmware.eff
ceba8faec925d61561d73219b2f0bd4a 2_9_4_D62_firmware.eff
8e31f8ed1d8222ce5fcb3d344ce72187 2_9_4_D65_firmware.eff
40d3d629e03747f272cb31d2db9fa2b2 2_9_4_D70_firmware.eff
2_9_2
November 19, 2019
Issues Resolved:
Correct error handling multiple multicast streams simultaneously
Correct omission of some translation strings from languages other than EN and RU
Correct error displaying text input box for password in web config
New Features:
Add support for disabled tag on logout application
Add setting (tls_allow_wildcard_certs) to allow acceptance of wildcard TLS certificates for SIP signaling
Improvements:
Remove mitigations for SIP Core TLS signaling socket overload and replace with final fix
Update to new public CA bundle (October 16, 2019)
MD5 Sums
9b0cf1a95bb8c1abac8ad23fb42fdce3 2_9_2_D40_firmware.eff
5ca06044f26936ef9f3e56e10b5e8f60 2_9_2_D45_firmware.eff
239b6cbff16bed8a823761c535ebda54 2_9_2_D50_firmware.eff
b9ec48892e1847323384c8a7673d8457 2_9_2_D60_firmware.eff
2c97ddb6a742f4a07834d5e66375564d 2_9_2_D62_firmware.eff
5da03bdd403d84f8e4e8a1034fd966fa 2_9_2_D65_firmware.eff
1584b630c79c5d6c48b6598f998bcb0a 2_9_2_D70_firmware.eff
1_12_1
November 19, 2019
Issues Resolved:
Correct improper application of pbx_credentials for account slot 0.
Correct improper application of server matching between host_primary server and use_proxy_for host for parking application.
Correct error handling multiple multicast streams simultaneously
New Features:
Add setting (tls_allow_wildcard_certs) to allow acceptance of wildcard TLS certificates for SIP signaling
Add support for ICE and STUN using enable_ice and stunaddr settings.
Improvements:
Update to new public CA bundle (October 16, 2019)
Remove mitigations for SIP Core TLS signaling socket overload and replace with final fix
MD5 Sums
5c4dfcf582471966d69ec6bdd3e6f6e3 1_12_1_D80_firmware.eff
1_12_0
November 11, 2019
Issues Resolved:
Correct minor German language translation errors
Correct occasional failure to preserve foreground state of Favorites screen
Correct duplicate User-Agent header in 200 OK response to INVITE
Correct failure to properly address some BT headsets for certain units
New Features:
Add support for SIP signaling over TLS
Add support for SDES media encryption
Allow 802.1X configuration of all methods, except EAP-TLS, from bootconfig via new network option
Improvements:
Update logic for processing config_server_url changes
Update SIP core to new version
Update to new public CA bundle
MD5 Sums
b81057a0083ac6594ca3055912894778 1_12_0_D80_firmware.eff
Users using TLS signaling against SIP servers must be aware that upgrading to this version will, unless their server utilizes a publicly-signed certificate, break their TLS connection to the SIP server. Users who need to connect to self-signed servers must load the server's self-signed, custom root certificate into the phone using the phone's <cert> config handler.
2_9_1
November 11, 2019
Issues Resolved:
Correct occasional failure to hold-off reboot events triggered by a configuration update while on-call
Correct duplicate User-Agent header in 200 OK response to INVITE
New Features:
Add page_indicators expansion module attribute to control paging indicators, disabled by default, model D65 only
Allow 802.1X configuration of all methods, except EAP-TLS, from bootconfig via new network option
Verify TLS SIP servers by default; allow_insecure_ssl setting will restore older, non-verified behavior
Add support for improved sidecar
Improvements:
Update in-product images to Sangoma branding
Move Settings button in Bootconfig's No Multicast Servers screen from the second to the third soft key to improve testing automation
Update SIP core to new version
Update to new public CA bundle
Update logic for processing config_server_url changes
MD5 Sums
2c48c7affd390fd4681efea1167e6d6f 2_9_1_D40_firmware.eff
57b6e70bf05f5649e5695c8845f8c13c 2_9_1_D45_firmware.eff
c780b087ec9e4abf838b65b0c796defc 2_9_1_D50_firmware.eff
57fd4e48ad872c06088b98d817da7d01 2_9_1_D60_firmware.eff
0c03a8147114d8519857d7b3c4ed991d 2_9_1_D62_firmware.eff
6517e71b49966cde8609adc3bb33ce67 2_9_1_D65_firmware.eff
58b0677f1a3c0f02686082a7a8e041d8 2_9_1_D70_firmware.eff
Users using TLS signaling against SIP servers must be aware that upgrading to this version will, unless their server utilizes a publicly-signed certificate, break their TLS connection to the SIP server. Users who need to connect to self-signed servers must load the server's self-signed, custom root certificate into the phone using the phone's <cert> config handler.
1_11_3
August 20, 2019
Issues Resolved:
Correct failure to properly fall-through on a transfer to a non-existent number
Correct improper formatting of Accept header on outbound INVITEs
Correct failure to ensure DPMA session is disconnected on logout
Mitigate TCP SACK vulnerability
Correct improper hangup of un-answered incoming call when hanging up existing call using handset
Correct timing related failure to blind transfer unanswered incoming call via Contacts app
Correct occasional overlap of voicemail playback with incoming ringtone
Correct failure to show call card on Switchboard initiated conference join
Correct occasional issue with out-of-order missed call notifications
Correct error causing logout enabled and logged out phone to return to previous account after reboot
Correct configuration-specific error in validating login password
Correct failure to return a logged out phone to the login screen after power loss
New Features:
Support playback of multicast audio streams
Support compact SIP headers
Support conference state parameter for non-admin users
Improvements:
Improve display of certain French language timestamps in missed call notifications
Update logoff and login language to reflect phone's unconfigured state
Move outbound proxy setting from account parameter to new account child element outbound_proxy
MD5 Sums
57905717c3a0b1f02dbb38ccb884c2d1 1_11_3_D80_firmware.eff
The addition of the new outbound_proxy child element to the account tag provides backwards compatibility, for now, by preferring the account parameter-defined configuration first. In the future, this backwards compatibility will be removed. Please plan accordingly.
2_8_6
August 7, 2019
Issues Resolved:
None
New Features:
None
Improvements:
Handle LogOut situations where Switchvox is configured for admin PIN instead of user PIN
MD5 Sums
34bd7245b4b1e4eb0775ce41d1c6a6ee 2_8_6_D40_firmware.eff
08833942861c6905113c8058fc90664f 2_8_6_D45_firmware.eff
39dda6aaa4ecd39a44d1ffde3b01f848 2_8_6_D50_firmware.eff
b3beec2f092cfa217a3e04dff860327d 2_8_6_D60_firmware.eff
f22d736acbe4640ce1ea47670b77da49 2_8_6_D62_firmware.eff
09b90609bce2b03b72d551f29762f4c7 2_8_6_D65_firmware.eff
3941f2f2be6f9bc3a7927d61e800595e 2_8_6_D70_firmware.eff
2_8_5
July 19, 2019
Issues Resolved:
Correct failure to properly display record icon and amber light during voicemail recording if phone is additional phone
Correct failure to properly parse embedded username in Option 66 string
Mitigate TCP SACK vulnerability
Correct failure to properly validate outbound proxy address against incoming calls
New Features:
Support compact SIP headers
Improvements:
Move outbound proxy setting from account parameter to new account child element outbound_proxy
Update logoff and login language to reflect phone's unconfigured state
MD5 Sums
7446aaef8bb1cfce0cd3a55f5bb65c51 2_8_5_D40_firmware.eff
4afe93f95c82645ac80ea102fd84ecea 2_8_5_D45_firmware.eff
662254f93cdf0325eeafcf898c4354f4 2_8_5_D50_firmware.eff
c62f0cff7cc4eeab258be3ab98b7972c 2_8_5_D60_firmware.eff
b94bfb9f0680dab4e883f2c646b35c43 2_8_5_D62_firmware.eff
dba01029aa178c9a0c5dd9c3999a0b2c 2_8_5_D65_firmware.eff
9a83d93d988271fdee7748fc78e012b0 2_8_5_D70_firmware.eff
The addition of the new outbound_proxy child element to the account tag provides backwards compatibility, for now, by preferring the account parameter-defined configuration first. In the future, this backwards compatibility will be removed. Please plan accordingly.
2_8_2
June 4, 2019
Issues Resolved:
Correct occasional SIP transaction issue causing core crash
Correct failure to display port setting in config server dialog if server was manually defined to include sip:proxy
Correct failure to rebind SIP core to new DNS server during DHCP release if IP address remained the same
Correct occasional reboot after on-call config update requiring VLAN method change
New Features:
None
Improvements:
None
MD5 Sums
267676a26a9a46de02c3106c989dcfb9 2_8_2_D40_firmware.eff
ccabf37973bfef20c1fe511bff8814a1 2_8_2_D45_firmware.eff
d0faf176842c18f4e2cd030ef1196480 2_8_2_D50_firmware.eff
fd59d10c7c7ae3c33e70205c5f659e76 2_8_2_D60_firmware.eff
be60786fb46bdfe188a5c3edaad66dfb 2_8_2_D62_firmware.eff
cbf92505f0323875db3c9fe7ed0eadb6 2_8_2_D65_firmware.eff
a82b1e84277d0c023b628837ee0a2939 2_8_2_D70_firmware.eff
1_10_0
May 13, 2019
Issues Resolved:
Correct failure to update call banner connected line information in certain scenarios
Correct improper labeling of transfer modal cancel button
Correct issue presenting ringing tone instead of call waiting tone during certain multi-call scenarios
Correct failure to honor outbound proxy settings
Correct failure to properly parse empty string account settings
New Features:
Support dynamic contact photos
Support alternate host definition
Provide software interface for driving new LCD
Improvements:
Improve drop menu background in conference app room selector
MD5 Sums
b43fa52392de93cfcda58709e522f0c4 1_10_0_D80_firmware.eff
1_9_7
April 25, 2019
Issues Resolved:
Properly update end of conference button strings for English language
Correct erroneous behavior that required phone restart to apply updated ringtone indications
Correct erroneous treatment of angle brackets in Alert-Info headers
Mitigate a condition that causes blank entries to appear in the conference participant list
New Features:
None
Improvements:
None
MD5 Sums
18a0e46176bebb7f4ce8e7bd148cac2c 1_9_7_D80_firmware.eff
2_8_1
April 18, 2019
Issues Resolved:
Correct error with PLAR on non-primary lines
Prevent dropping of first call on receipt of 603 for second call
New Features:
Allow long-press of 0 to affect a + for first character dialed
Improvements:
Improve several German translations
MD5 Sums
f48900179d2501cd20cba7c0abb14af5 2_8_0_D40_firmware.eff
9f83430646773ffa415aa41da06a565b 2_8_0_D45_firmware.eff
7e372ccb3de41b908efe199ddccc19fa 2_8_0_D50_firmware.eff
c604f95bb81fd283a014e4441d3bd575 2_8_0_D60_firmware.eff
ad7452abac628ed2e404a53c64dc9474 2_8_0_D62_firmware.eff
11eacf1f331fee6ca808143cae37d0f9 2_8_0_D65_firmware.eff
1a94108e9599650c2f229d20bad5cacb 2_8_0_D70_firmware.eff
2_8_0
April 8, 2019
Issues Resolved:
Correct issue presenting proper outbound proxy signaling prefix for TCP and TLS transports
New Features:
Support EXP100 sidecar on D65 model telephones
Support dynamic call card photos for incoming and outgoing calls
Improvements:
Allow capable BT headsets to announce incoming caller number
MD5 Sums
68ebed7cbb004b7318130d159803be09 2_8_0_D40_firmware.eff
e54af5b84f0c70a89f0417fa8f579bcf 2_8_0_D45_firmware.eff
f527cbca5090ca8aa06d1e964b83a525 2_8_0_D50_firmware.eff
d0b14cc72d667b09fb8ab5495bd28343 2_8_0_D60_firmware.eff
10f6ecc83f14d4807b7f7a414f147952 2_8_0_D62_firmware.eff
6c653ba221cb77a1b4098d96982f4809 2_8_0_D65_firmware.eff
0db23915f3599192f0e318082d0ffd01 2_8_0_D70_firmware.eff
2_7_4
March 25, 2019
Issues Resolved:
Correct transfer behavior to respond properly to Accepted in absence of Trying
Correct erroneous treatment of angle brackets in Alert-Info headers
New Features:
None
Improvements:
None
MD5 Sums
d0667de2201869a332172c409884d57c 2_7_4_D40_firmware.eff
d9632db572559942f380b665b0dca816 2_7_4_D45_firmware.eff
d68eac93ab8fb8c8dd0de4c46991f766 2_7_4_D50_firmware.eff
10055abb1c3d2e9bef0cc0d10567d25e 2_7_4_D60_firmware.eff
f08978414f7dd0cb7462c4784a5d6585 2_7_4_D62_firmware.eff
42fe4b20b80c3cd0e2b23205f699a191 2_7_4_D65_firmware.eff
ba0f8a2a2eb38f0db39f9613186dccf5 2_7_4_D70_firmware.eff
2_7_3
March 6, 2019
Issues Resolved:
Correct regression in 2_7_2 that caused parking notifications not to display
Correct presence subscription update error when changing networks
Correct failure to fetch server call logs if phone credentials include special characters
New Features:
None
Improvements:
Properly account for failover mode inside the call log app if server-side call logs are being used
MD5 Sums
b4988d402666f8432cb7769a42465c58 2_7_3_D40_firmware.eff
7462b50f4f10d01a8ac42724fdeedc05 2_7_3_D45_firmware.eff
044b907c5f500433a5ee21ba39a54ea5 2_7_3_D50_firmware.eff
866d36b1add99b737f9dfecd3970a3de 2_7_3_D60_firmware.eff
d323e2249d75bc37bbce764a28ee570a 2_7_3_D62_firmware.eff
01be97de26acb0b0937cfc9ca40c711c 2_7_3_D65_firmware.eff
2f7c208cb6dcb94afd84f630dfc552bb 2_7_3_D70_firmware.eff
1_9_5
March 5, 2019
Issues Resolved:
Correct issue that caused UI crash when external users joined conferences
Correct failure of additional / secondary phones to log into the conference app
Correct call transfer button state for existing calls
Ensure that loss of a primary account affects a LogOut on a LogOut-enabled phone
Ensure dream mode is activated when a phone is forcibly logged out
Properly update config_server_url as directed by fetched config
Properly handle phone reconfigure when LogOut is enabled and a token is invalidated
Correct failure of phone to perform tech support VPN connection
Prevent erroneous busy tone following blond transfer on busy server
Correct issue that could cause unit to become stuck during boot or reboot cycle
Correct issue that caused OpenVPN connection to timeout
Correct issue that caused Dream Mode to not turn on when phone was logged out
Correct issue that displayed pickup cards for the local phone user
Correct issue that displayed pickup cards for dialed targets
Correct various issues with ringtone indications
Properly support Unavailable presence type for Contacts and Favorites
Correct error with German translation for "Record"
Address minor call log issue when multiple accounts are in use
New Features:
Add LogOut application
Support 802.1X authentication
Support wideband Bluetooth audio
Allow selection of TCP transport types for config servers and utilize TCP as a transport type for SIP hosts
Provide OpenVPN support
Add support for account children use_call_log_api and call_log_fetch_entries for using the Switchvox call log API to populate the Call Log app
Implement the Conference management application
Improvements:
Improve the language used for ending a conference
Improve drop shadow on conferences icon
Add additional logic to further prevent boot looping
Improve responsiveness of factory reset gesture
Prevent phones with newer touch panels from erroneously downgrading firmware
Store current local time on reboot
Update conference app layout
Support additional touch controller
Improve layout of tech support card
MD5 Sums
de69783afabc2b4ecb1fc14c100d03a6 1_9_5_D80_firmware.eff
2_7_2
January 4, 2019
Issues Resolved:
Correct error updating Caller ID on a transferred leg of a conference call
Correct minor SIP transport error
Prevent call hangup during certain transfer scenarios
Correct call_log_api API credentials error when acting as an additional phone
Handle improbably long User-Agent strings
New Features:
Add app redirection support for Endpoint Manager
Allow Contacts app to foreground into a group as specified by the app setting preferred_contact_group
Improvements:
Default call_log_fetch_entries to 50, instead of 0
Improve some German strings and translations
Improve LogOut behavior when extension is stolen
Add Call Log Loading message if using Call Log API
Reduce unnecessary logging
Reduce voicemail API messaging traffic when message count is zero
Improve logging of SIP events so that they can be retrieved via syslog
Improve BT support for Sennheiser headsets
Status application refreshes presence list when foregrounded
Prevent unnecessary voicemail refreshes
MD5 Sums
a823a7dc5ccc37813eee4cbc609919c4 2_7_2_D40_firmware.eff
7855de19d5cc4bce663cb6b0446cc1bc 2_7_2_D45_firmware.eff
216d2c959484794492be79104f83d199 2_7_2_D50_firmware.eff
fbb69c98e11eb4e2519172ba9eef028e 2_7_2_D60_firmware.eff
e46572bdd3924263b721bc37a1708f03 2_7_2_D62_firmware.eff
c4d26969b4f31dd72b0f3487cf388e3d 2_7_2_D65_firmware.eff
233a196d986d0a5e1292cb5e5601f46a 2_7_2_D70_firmware.eff
1_8_16_1
December 10, 2018
Issues Resolved:
Correct issue that could cause unit to become stuck during boot or reboot cycle
New Features:
None
Improvements:
None
MD5 Sums
44abb64a2b79bb4dcf275862278ae127 1_8_16_1_D80_firmware.eff
1_8_13_2
December 10, 2018
Issues Resolved:
Correct issue that could cause unit to become stuck during boot or reboot cycle
New Features:
None
Improvements:
None
MD5 Sums
41debc4d51759a5fb759a9fd21b7c213 1_8_13_2_D80_firmware.eff
2_6_8
November 5, 2018
Issues Resolved:
Correct transfer hangup issue occurring during certain multi-call scenarios
New Features:
None
Improvements:
None
MD5 Sums
fed5570fcce4607cef3fc407e187c703 2_6_8_D40_firmware.eff
f770efcb7ff0e9385c064761a4f54702 2_6_8_D45_firmware.eff
6c175a64738fa1e22d214b83b4a3107f 2_6_8_D50_firmware.eff
72a91a724999391329aab711990dbec5 2_6_8_D60_firmware.eff
b21568e789511d3a4846705a27bc08ea 2_6_8_D62_firmware.eff
3bbdca6b0033519b191be380144068b4 2_6_8_D65_firmware.eff
b545c8702e0b17fb8d067132ab724349 2_6_8_D70_firmware.eff
1_8_16 (RESCINDED on Dec 6, 2018)
October 30, 2018
Issues Resolved:
Correct UI issue that prevented setting of manual VLAN or static IP addresses
New Features:
None
Improvements:
None
MD5 Sums
75290c7bda85dc9754f7b5288a035396 1_8_16_D80_firmware.eff
Note that phones loaded with this release will not downgrade to firmwares prior to 1_8_16.
1_8_13 (RESCINDED on Dec 6, 2018)
October 3, 2018
Issues Resolved:
Correct occasional issue with stuck state resulting in failure to make API requests
Correct occasional failure to process a firmware download request
Correct occasional issue with black screen
Correct occasional error with favorites showing a blank list
Correct occasional error where phone returns to bootconfig following a config update
New Features:
None
Improvements:
Generate contacts picture relative URLs as HTTP
Gracefully handle situations where firmware can't be retrieved or retrieved firmware is invalid
Revert changes that prevented speaker and headset buttons from putting phone on-hook
Improve BT audio when input levels are high
Improve watchdog behavior
MD5 Sums
4b92e6d2eff986d9f50c96915256c1ef 1_8_13_D80_firmware.eff
2_7_0
August 29, 2018
Issues Resolved:
None
New Features:
802.1X root CA is now built on the combination of the phone's baked-in root CA as well as any in-line config added certs. 8021x_root_cert parameter is no longer available, all models.
802.1X client cert and client key are now controlled by 8021x_client_cert and new 8021x_client_key settings that point to values derived from new in-line config added clientcert and clientkey. 8021x_client_cert no longer utilizes url option, all models.
Phones now, on boot, to handle situations requiring SSL validation in an environment with no Internet access, prefer NTP servers as provided by DHCP Option 42. This behavior is controlled by the ntp_prefer_option42 setting, all models.
Add new OpenVPN configuration handler openvpn_inline_config with enhanced update behavior. Older OpenVPN configuration handlers are deprecated and will be removed in a future firmware release, D6x models.
Add new local webpage to add and enable OpenVPN client, accessible at http://[ip of phone/vpn, D6x models.
Improvements:
Enable 802.1X SSL security by default, controlled by allow_insecure_ssl phone setting, all models.
For non-Switchvox or DPMA environments, where the config server is not available on-boot, cause the phone to perform 4 auto-retries, separated by 30 seconds, to contact the server, after which the phone use a previously-stored local configuration. If no local configuration is available, but the phone was still directed to a configuration server by an external means, e.g. DHCP Option 66, the phone will restart after the 4th failed retry, all models.
MD5 Sums
8243e460b2643baea6641282e1abe7e6 2_7_0_D40_firmware.eff
9f69bd39d7572b4ce89c4d4b3c79b10a 2_7_0_D45_firmware.eff
f6f106be0263992c24d8e05c8f4f8f52 2_7_0_D50_firmware.eff
9a61aa1d89fded6c530e6dd672f47ec9 2_7_0_D60_firmware.eff
8d98a314d514347e2dcab3d0a819f5e5 2_7_0_D62_firmware.eff
77b322bc4b831e108df1ba100769583d 2_7_0_D65_firmware.eff
b33d736249b64192622160b98040b301 2_7_0_D70_firmware.eff
2_7_0 firmware has breaking changes pertaining to 802.1X configuration. Do NOT upgrade to 2_7_0 or newer firmware without understanding these changes and their consequences on your installation. Beginning with firmware 2_7_0, 802.1X SSL security is on by default. Phones will validate the server's certificate on connection by default. To disable this behavior, the phone must have the allow_insecure_ssl setting enabled.
Further, the behavior of the 8021x_client_cert parameter is different. It no longer performs a cURL to a URL. Instead, it references a client cert that is in-lined in the phone's <certs> config element children. And, a combined client cert and client is no longer assumed. A distinct client key, for 802.1X methods (EAP-TLS) that require it, must be also be provided in the config and then referenced using the 8021x_client_key parameter.
Additionally, phones now prefer NTP servers as provided by DHCP Option 42. If NTP servers are not provided by Option 42, the phone will continue to use NTP servers as baked into the firmware (0.digium.pool.ntp.org / 1.digium.pool.ntp.org) or as provided by an external configuration source. However, if NTP is provided by Option 42, the Option 42-specified NTP servers will be preferred unless the ntp_prefer_option42 configuration element is disabled.
1_8_8
June 19, 2018
Issues Resolved:
Correct issue that caused phones assigned a static IP to, on some switches, bring the interface up and down repeatedly
Correct issue that caused phones assigned a static IP to improperly apply manually-entered DNS servers
New Features:
None
Improvements:
Allow numbers recalled into the dialpad to dial out the proper account, not just the primary account
MD5 Sums
8d3b42b074e184363b5d22de9a7867e2 1_8_8_D80_firmware.eff
2_6_6
June 8, 2018
Issues Resolved:
Correct regression that prevented multicast audio from being played back in certain scenarios
New Features:
Provide new phone setting, call_control_checkx, that, when turned on, allows the confirmation key to answer a call and the x-key to reject a call. Defaults to off.
Improvements:
None
MD5 Sums
864e14cc418495bfc37ceddf7f5c248c 2_6_6_D40_firmware.eff
37d0188df33291d420e2192a6d1fab1c 2_6_6_D45_firmware.eff
2d5dae6280519faac2971e13eaae0d30 2_6_6_D50_firmware.eff
817677a9990ea0ade064339662287b05 2_6_6_D60_firmware.eff
75352f0c6e957bf1f646709683fd3f15 2_6_6_D62_firmware.eff
a373ec3a80c09c27638920bc1be666a2 2_6_6_D65_firmware.eff
0994db51685ca2ba4dde42e4fa26c41f 2_6_6_D70_firmware.eff
2_6_5
May 9, 2018
Issues Resolved:
Correct issue with multicast playback on non-D6x models
Correct failure to properly disable the Record soft key for non-primary accounts
Correct regression that incorrectly utilized STUN lookups
New Features:
Support alternate credentials for host_alternate registration
Allow definition of an extension for a multicast listener, thereby directing the phone to ignore listeners when the number is called by the phone, all models
Improvements:
None
MD5 Sums
9550b3f1da7142895333d752592b59f0 2_6_5_D40_firmware.eff
2fa7915c0a1c8195793b6d141f8199a2 2_6_5_D45_firmware.eff
64272fcec14cf5ce550dd53eecb30eb0 2_6_5_D50_firmware.eff
fb904896d9f861038873ebb9a157d1ce 2_6_5_D60_firmware.eff
d05d697e6d5ef3d246698493de6e3069 2_6_5_D62_firmware.eff
0cb70257d3fc9a53ca2a10267ddb7150 2_6_5_D65_firmware.eff
89c5c0e44daf3a869e2ff4ad52157161 2_6_5_D70_firmware.eff
1_8_1
April 12, 2018
Issues Resolved:
Correct issue with returning to configuration screen in certain cases
Correct issue inheriting default BLF items indications behaviors
Correct issue displaying peered Switchvox caller ID prefixes within the voicemail application
Correct issue playing back indications tones for BLF items
New Features:
Add support for pickup_action by way of Call Pickup activity cards
Add new UI preference to control display of pickup notifications
Improvements:
Improve dynamic update behavior of BLF Items within the UI
Mute BLF indications if the phone is in DND status
MD5 Sums
0e25e90dd6553960b92a6c1f23c28983 1_8_1_D80_firmware.eff
2_6_1
April 4, 2018
Issues Resolved:
Correct issue properly updating contacts when a new contacts file is received, regression introduced in 2_5_0
Correct issue operating in dynamic IPv6 environments without an IPv4 DHCP server
Correct issue, in scenarios involving Option66-derived config servers, making API requests without considering the proxy URL, all models
Correct issues noted by AST-2018-002 and AST-2018-003, all models
Correct display of secondary DNS when IPv6 is enabled and preferred, D6x models
Correct additional issues when playing back ringing tones on watched BLF keys, all models
New Features:
Add support for account children use_call_log_api and call_log_fetch_entries for using the Switchvox call log API to populate the Call Log app
Add translation keys for Pickup action, all models
Mute BLF indication ringing tones if phone is in DND status, all models
Expand indications to support manipulation of background and foreground label color, D6x models
Add Quick Logoff app - currently not exposed, D6x only
Add Beta support for IPv6, D6x only
Remove Call Recording key from non-primary accounts, all models
Support Switchvox 6.7.1 contacts.add method, all models
Improvements:
Allow entry of IPv6 server addresses, not just hostnames, in the Boot Menu server screens.
Change logoff app to LogOut to match other product terminology, D6x models
Update to March 7th, 2018 CA bundle, all models
Allow BLF Items and Contacts files to support md5 parameter for reload checking, all models
MD5 Sums
06f8e9d42c3068aca34b90fe66fec37f 2_6_1_D40_firmware.eff
d3b758790cfab7389ee206101b1c9172 2_6_1_D45_firmware.eff
4a5354e05e164dbe19bf79a0e6cdf05c 2_6_1_D50_firmware.eff
b4671ea66a390581f39cd72c3faf2400 2_6_1_D60_firmware.eff
8c0db8b5e137b952082eb4cd63346273 2_6_1_D62_firmware.eff
c5d4115051dbe9498f77c3af611adee2 2_6_1_D65_firmware.eff
a286c3b88a3e65d24677f16bb3ca6b53 2_6_1_D70_firmware.eff
1_7_1
March 16, 2018
Issues Resolved:
Correct synchronization issue between Activity Stream missed call notifications and line drawer missed call notifications
Correct synchronization issue between Switchboard Call Recording button and call card Call Recording button
Correct error processing visual voicemail server address in certain cases
Prevent call drop when adding or removing accounts
Correct issue with contacts disappearing after account changes
Correct failure to remove lines as directed by server
Prevent UI restart when adding or removing accounts
Correct memory loss when adding or removing accounts
New Features:
Allow manual VLAN assignment from boot menu
Allow static IP address assignment from boot menu
Disable the record button for non-primary accounts
Improvements:
Prevent re-touch of toolbar headset or speakerphone targets from hanging up an in-progress call
Periodically refresh Parking lot app when in the foreground
Auto-dismiss parking lot notifications after 10 seconds
Better set notifications and counts when removing accounts
Return missed calls and voicemail from the proper account
Remove call logs for an account that's removed from the phone
Correct errors in multi-line card layouts
When missed calls are disabled, do not display missed call badges in line indicator
MD5 Sums
cf6bac5a97092d6e08a49b468a6fae47 1_7_1_D80_firmware.eff
2_4_2
February 20, 2018
Issues Resolved:
Correct issue with audio presented via both loudspeaker and handset when handset is engaged
Correct issue when queued to playback multiple ringing tones via multiple rapid dial smart BLF indicators
New Features:
None
Improvements:
Restore add-contact functionality for non-SWVX environments where use_local_storage is true
Reduce footprint of EHS logging
Update cert generation
MD5 Sums
51bbec1ad17ae8dfe3909fa2c06a24a2 2_4_2_D40_firmware.eff
c90358610da26330078840fea136e70b 2_4_2_D45_firmware.eff
3ba58621a19bc5f0d07706fb51d54601 2_4_2_D50_firmware.eff
3fec4f845a6dfcbbdfebc6405649f420 2_4_2_D60_firmware.eff
0c5fe084450d30653ff022c15719f573 2_4_2_D62_firmware.eff
87e8c5ecf99a420e3fac521432a5a91e 2_4_2_D65_firmware.eff
ccc78da5aa0551ec87adec8c206a4fce 2_4_2_D70_firmware.eff
2_4_1
February 5, 2018
Issues Resolved:
Correct failure, in certain scenarios, to auto-retry connections to the proxy, in the event that the initial try failed, all models
Correct occasional failure to properly bring up VLAN interface when manual VLAN assignment is enabled, D6x models
Correct occasional failure to process restart command, D6x models
New Features:
None
Improvements:
Remove support for anonymous ciphers
Do not generate DESI strip PDF for non-D50 models
Update MWI LED behavior to assist in debugging. MWI LED will now turn red when reboot is called, off when reboot happens, green when kernel loads, amber when startup scripts are processing, and off when the startup scripts are complete and the phone application is launching, D6x models
Add comma delimiter to Contacts Info page when last name precedes first name, D6x models
If firmware fetch fails, because server doesn't respond or because URL is invalid, try 4 more times, every 30 seconds, and then restart and request an updated config, all models
MD5 Sums
800982ecf95eb3c6888bcc4e3ad1f504 2_4_1_D40_firmware.eff
27c05831beaeaa383e0ebb203fb764d5 2_4_1_D45_firmware.eff
891117ef454cad9b90e5cda6ae4db006 2_4_1_D50_firmware.eff
e4041679023ceec35c6dce61d9c2c21f 2_4_1_D60_firmware.eff
16f58fbf7917d0ec4bd50cf691f6eafb 2_4_1_D62_firmware.eff
8e626a6da843ff50fa904c60750f5886 2_4_1_D65_firmware.eff
80998ef7fdd1aab3c085358a3c14a45e 2_4_1_D70_firmware.eff
2_3_8
January 10, 2018
Issues Resolved:
Prevent non-D6x models from parsing undocumented TLS signaling parameter and ending up in a boot loop
Correct Caller ID lookup error
New Features:
Support Switchvox 6.7 Call Recording API change
Improvements:
None
MD5 Sums
c6a357acf3364c890d77edd9f723a492 2_3_8_D40_firmware.eff
d09ab777670f1af2d297617bced45d8c 2_3_8_D45_firmware.eff
ca7a47b5a5820ecbaa67b3b1873bc782 2_3_8_D50_firmware.eff
12c88a378dd03b843b506c722f41a560 2_3_8_D60_firmware.eff
5c3802125cfa326d148c8aa05662a62e 2_3_8_D62_firmware.eff
61b15222dfce5fe1127804dc22379d04 2_3_8_D65_firmware.eff
23afa0d0da26826982b13a81eb902c57 2_3_8_D70_firmware.eff
1_6_2
January 2, 2018
Issues Resolved:
Address issue with phone reboots following "-98" SSL messages from server
Correct issues with phone LLDP assignment and PC port VLAN assignment
Correct issue preventing ringing tone from playing out loudspeaker
Correct issue with BT microphone gain
Correct issue ignoring pairing from forgotten device
Prevent phone from making unnecessary proxy requests
Close favorites drawer on line selection
Properly handle adding and removing of lines
Correct call card alignment in single-line mode
Correct display of unavailable status icon in status bar
New Features:
Add support for multi-line operation
Display any waiting voicemails on system start
Add line label to status bar
Improvements:
To improve performance, allow phone to verify MD5 of fetched config before fetching a new config
Allow tagged packets received on the PC port, that are not being tagged by the phone, to traverse
Prevent LLDP packets received across the Network port from being forwarded to the PC port
Add additional logging to phone debug
MD5 Sums
a298a6f2cc49e0fc151dcf7c4220b6d5 1_6_2_D80_firmware.eff
2_3_7
December 20, 2017
Issues Resolved:
Address issues with phone restarts following certain bad SSL messages from DPMA
Address issue with phone remaining stuck on boot step 4 when receiving continuous ARP responses for in-use DHCP-provided addresses
Address issue with too many DHCP failures resulting in phone restart
Address startup issues with delayed NTP response
Address erroneous tech support enabled message in phone's admin menu
Address issue playing multicast audio when phone ringing tone volume is manipulated
Address D65 issue playing voicemail out headset port when headset_preferred BT devices are disconnected
New Features:
Allow gratuitous ARP, performed following DHCP assignment in order to determine if address is already in-use, to be disabled using new network_disable_arping phone setting, off by default
Improvements:
Improve boot time when drawing phone screen
Update translation strings in Contacts app
MD5 Sums
e2fa53d0e8565ff9d7503a443baef994 2_3_7_D40_firmware.eff
e871d8ab74aaaeb22d87ae172bfd0d27 2_3_7_D45_firmware.eff
cecc4d7f16d103f969a3f55cd1f7c67a 2_3_7_D50_firmware.eff
0aad8b743db20d091867727cb3001dc5 2_3_7_D60_firmware.eff
e1e86a23da6eaadd96b8a144466b45a1 2_3_7_D62_firmware.eff
0823e79c18560e027ae1809fbdd72970 2_3_7_D65_firmware.eff
c14a48aab196eeb9b2bf7cf1c8153efd 2_3_7_D70_firmware.eff
2_3_4
October 10, 2017
Issues Resolved:
Correct issue with call drops following quick exiting of the Call Parking notification screen and highlighting of another call handle in Asterisk environments, all models
New Features:
Add check-sync-reconfig event handler to allow reloading of config without restarting app suite, all models
Implement digest/basic user:pass support for all cURL requests, not just OpenVPN requests, all models
Enable SSL host verification by default, can be disabled using the allow_insecure_ssl setting, all models
Allow server-specific certs to be in-lined in the phone's configuration
Improvements:
Update SSL CA bundle, all models
Improve consistency of user-agent strings; cURL strings now are "Model Version (MAC)" as are SIP strings
If upgrading to this firmware, note that SSL validation is ON by default for ALL cURL requests. If phone is expected to connect to a server using a privately-signed certificate, allow_insecure_ssl setting MUST be enabled before the connection will succeed, or the phone's configuration must have been loaded with the server's cert using the <certs><cert></cert></certs> configuration element. This setting can also be controlled via the phone's config as well as via a boot menu option on the phone itself.
MD5 Sums
c4a1865a711b73f68223da90b74c361a 2_3_4_D40_firmware.eff
05e69fca7ec7509e0549fda62206549e 2_3_4_D45_firmware.eff
254e6bfbbf242a7dae125a3f5eeccac0 2_3_4_D50_firmware.eff
d5cda689d75e01d9f9cd324e966695e4 2_3_4_D60_firmware.eff
f04286e265fb7395bc61a4299dc6706b 2_3_4_D62_firmware.eff
3b2fd3fc358bbb6e1032d8904e69f12d 2_3_4_D65_firmware.eff
6a2e4c2c14835175ae68f5c286d92960 2_3_4_D70_firmware.eff
1_5_2
October 10, 2017
Issues Resolved:
Correct issue with BT display when turning functionality off and on quickly
Correct issue with improperly reporting BT connection status
New Features:
Enable SSL host verification by default, can be disabled using the allow_insecure_ssl setting and from the phone's Boot Menu
Allow server-specific certs to be in-lined in the phone's configuration
Improvements:
Allow touch of BT icon in status bar to dismiss BT menu, similar to other status bar icons
Allow relative URLs in the contacts picture definitions
If upgrading to this firmware, note that SSL validation is ON by default for ALL cURL requests. If phone is expected to connect to a server using a privately-signed certificate, allow_insecure_ssl setting MUST be enabled before the connection will succeed, or the phone's configuration must have been loaded with the server's cert using the <certs><cert></cert></certs> configuration element. This setting can also be controlled via the phone's config as well as via a boot menu option on the phone itself.
MD5 Sums
e5936b9b14112ab6a02f4ecbac132b8d 1_5_2_D80_firmware.eff
1_4_6
August 30, 2017
Issues Resolved:
Correct issue handling inbound calls that disconnect before they can be confirmed
Correct issue with locally bridged audio occurring when an outbound call has early media and an inbound call is answered
Correct issue with LED state matching incoming and outgoing calls in certain cases
Correct issue with processing phone configurations with a disabled voicemail app
Correct issue playing audio and sending DTMF during early media stages
Correct issue displaying proper call card if transferring to a contact with prefix that matches a contact without prefix
Correct issue with wrapping of "Call Log" header text
New Features:
None
Improvements:
Missed call card shows name and number when both are available
MD5 Sums
f88ed459ab0b8e44c329d8f355f95a13 1_4_6_D80_firmware.eff
2_2_2_3
July 25, 2017
Issues Resolved:
Correct issue with Handshake renegotiation during DNS outages; D40, D45, D50, D70 models (D6x models already fixed)
Correct display of special type contact info page text, D6x models
New Features:
Add lock_ringing_volume setting, disabled by default, that, when enabled, prevents use of the phone's hard-key from manipulating the ringing volume of the phonert-Info
All ring_type to account so that an account can be configured for a particular type of ringing in the absence of an explicit Alert-Info
Add send_mac_with_useragent setting that will append phone's MAC address to any cURL User Agent strings to assist in troubleshooting
Improvements:
Restrict check-sync to registered hosts if accept_local_calls parameter is set to "host," all models
To improve performance, allow phone to verify MD5 of fetched config before fetching a new config
MD5 Sums
563fba7ea04f896e23208d01f1242620 2_2_2_3_D40_firmware.eff
fc34e0015d3eeed16fea85c6c41803b2 2_2_2_3_D45_firmware.eff
5d513d23a62ff389fb94b8a3ed0ab91c 2_2_2_3_D50_firmware.eff
e9fbe2f17fff9620a9b40494afbf2d08 2_2_2_3_D60_firmware.eff
9b46e9ce85231810bd73d73e7c46f1f2 2_2_2_3_D62_firmware.eff
cad1240ae420f4ebe7eaedf5513da3c7 2_2_2_3_D65_firmware.eff
77328c133c5896ccfbffb43115ab1a67 2_2_2_3_D70_firmware.eff
1_4_3
July 20, 2017
Issues Resolved:
Correct occasional issue with failures to SUBSCRIBE on phone startup
Correct issue with LLDP, whereby phone inadvertently advertised itself as both a PD and a PSE. Phone now only advertises PD.
Correct issue with voicemail playback slider duration not matching actual voicemail duration
Correct failure to shift notification on idle screen when minimized call banner is in foreground
Correct issue when returning from a contact detail page to the contacts search view
New Features:
Add send_mac_with_useragent setting that, when enabled, causes phone to append MAC to its User Agent string for any cURL file requests
Improvements:
Restrict check-sync to registered hosts if accept_local_calls parameter is set to "host"
Update navigation menu graphics and add pressed versions of graphics
Better accommodate blank caller name or number in call cards, call log, and activity stream notifications
Convert nav menu settings items (sound, bluetooth, localization, display settings, call answer settings) from modals to full-screen apps
MD5 Sums
8a861cab86729ce939ceae0f8dbdaf5d 1_4_3_D80_firmware.eff
1_4_2
June 30, 2017
Issues Resolved:
Correct issues displaying proper voicemail forward targets
Correct issue sending SUBSCRIBEs without a user-part before main phone account is registered
Remove kernel version information from LLDP advertisement
Correct synchronization issues with toolbar keypad button
Correct issue with matching incoming calls to Contacts' non-primary numbers
Enforce Bluetooth disconnect when un-pairing
Correct issues with updating inbound call card Caller ID information when PAI is received
Correct occasional issues showing low-level Bluetooth dialogs
New Features:
Enable Power-via-MDI TLV in LLDP advertisement
Improvements:
Improve hostname advertisement in LLDP
Default to caller name of "Unknown" in Cal Log if received data is blank
Utilize Caller Name, if available, in lieu of Caller Number in Missed Call Cards
MD5 Sums
1bfff8126fb81ed8291d83f13b3141bb 1_4_2_D80_firmware.eff
2_2_2_2
June 20, 2017
Issues Resolved:
Correct issue with making calls on web-configured phones if host primary port is blank, all models
Correct issues with duplicated controls in Web UI when switching control tabs, all models
Correct issues with erroneously displaying side screen BLF Items when main screen items also exist, D6x models
New Features:
Re-enable Power-via-MDI TLV in LLDP advertisement, all models
Add protocol field for selecting TCP transport for Digium Configuration Server to phone UI, D40, D45, D50, D70 models
Improvements
None
MD5 Sums
1746d0ae879e7ec2646453763ade0419 2_2_2_2_D40_firmware.eff
84713148f1889b968347fda7b3517a99 2_2_2_2_D45_firmware.eff
159028339bd78123a90a5dd0b935f1c5 2_2_2_2_D50_firmware.eff
36a998abffbf4ac5b1199423c045d125 2_2_2_2_D60_firmware.eff
fa9d62c8a4f2592ab25d63769ebfe547 2_2_2_2_D62_firmware.eff
9eaf35be7d4dc297b29571924aa76afd 2_2_2_2_D65_firmware.eff
8cc0e81100ce854e04b1a1e0120bd178 2_2_2_2_D70_firmware.eff
1_4_1
May 30, 2017
Issues Resolved:
Correct issue with Dream Mode not operating on un-configured phones
Correct occasional issue with active voicemail screening notifications not being promptly removed
Correct issue with voicemail PIN codes lookup priority for Switchvox and DPMA systems
Correct issue with large numbers of contacts and subscribes causing UI restarts
Correct issue with transferring ringing calls to a keypad dialed number while already on a call
Correct layout error in parked call notifications
Correct issue with System Waiting dialogs
Correct issue with call transfer of incoming call while already on-call
Correct occasional timing issue with contact subscriptions on startup
Correct issues with contacts details presence and device state when connected to non-Switchvox DPMA systems
Correct issues with supporting server_uuid DPMA parameter for non-Switchvox systems
Correct issues with processing voicemail PIN in some non-Switchvox DPMA configurations
Correct failure to prompt for voicemail PIN, if enabled, when screening voicemails
Correct issue with showing improper list of voicemail forwarding targets
Correct display behavior of inactive parking app and parking button on call card
Correct issue with hide_options preference config value that formerly required reboot to take effect
Correct display behavior of inactive call log app
Correct display behavior of inactive voicemail app and send to vm button
Correct display of inactive ignore call card button
New Features:
Add support for Bluetooth headsets, controlled using new Bluetooth option in the phone's navigation drawer
Add support for screenshots using http://[ip of phone/cgi-bin/screen_shot using the login "admin" and the phone's login_password (defaults to "789")
Add support for phone reboot using http://[ip of phone]/cgi-bin/phone_restart.cgi using the login "admin" and the phone's login_password (defaults to "789")
Add support for loading firmware using phone's web server when server has not specified a firmware for the phone, using http://[ip of phone/firmware using the login "admin" and the phone's login_password (defaults to "789")
Begin first round of translation imports
Add support for selection of 12 or 24-hour clock type to localization menu
Present users with application errors within apps
Add support for unavailable presence type
Improvements:
Expand space for PIN entry label in voicemail card for non-English languages
Adjust keypad and home toolbar labels for French
Add translations for missing elements in main UI
Convert sound settings dialog to full-screen
Provide uniform size/style for toggle buttons in settings cards
Improve Bluetooth settings, Contacts, Voicemail, and Call Log layouts
Sort contacts by available name if first or last name is missing
Improve time zone selection screen
Numerous improvements to phone's boot up process regarding auto-start and timeouts
Improve spacing of toolbar icons to make mute button easier to touch
Clear voicemail PIN if entered erroneously
Clear keypad buffer when going to an active call state
Reduce MTU-size of packets when connecting to a remote DPMA instance using UDP transport, all models
MD5 Sums
b0898e439f02b8a7230900cb404a96d7 1_4_1_D80_firmware.eff
2_2_1_8
May 4, 2017
Issues Resolved:
Correct display of secondary DNS server within phone UI, all models
Address issue with improper SRTP keying during multi-call scenarios, D6x models
New Features:
None
Improvements
Reduce MTU-size of packets when connecting to a remote DPMA instance using UDP transport, all models
MD5 Sums
a20081d90a71c75aacce055d3491e6e8 2_2_1_8_D40_firmware.eff
a96e8bdd4f0c7b57ab6ed610eb989401 2_2_1_8_D45_firmware.eff
dc774255b08e001d9c27488073dd3e43 2_2_1_8_D50_firmware.eff
82227a961b27fc5b3097826a9fd25c35 2_2_1_8_D60_firmware.eff
a911916fe429c39c838215f85b9c0e4b 2_2_1_8_D62_firmware.eff
76cabdca239f4cc60784a3b4352e2a1d 2_2_1_8_D65_firmware.eff
acfb7ed0fbaa5b7f456b996ce43b8bbc 2_2_1_8_D70_firmware.eff
2_2_1_7
April 25, 2017
Issues Resolved:
Address issue with stale call transfer handles when phone doesn't receive 180 Ringing
Address issues uncovered by AST-2017-002 and AST-2017-003
Address regression with SRTP support, D6x models
Correct translation errors in config server auto-retry screen, all models
Correct issue with dialing while off-hook and in Call Log application, all models
Correct several translations for various languages, all models
New Features:
Support Asterisk's Unavailable presence type, all models
Add a stand-alone firmware page to the web UI, accessible via http://[ip of phone]/firmware that is protected by the login_password and is only accessible when no firmwares or public_firmwares are specified in the configuration, D6x models
Improvements:
Modify behavior of host-based call rejection by allowing calls with AOR-matching To: headers to progress, all models
Ignore index values for BLF Items pages that list items on what should be a non-accessible side screen and display them anyway, in order, D6x models
Fall-back to older app authentication method when never methods are not available, D6x models
Increase maximum file size of wallpapers from 50K to 80K, D6x models
MD5 Sums
572f1e035e8260bf2a5399249df42c6e 2_2_1_7_D40_firmware.eff
de37ef181d2e65468d1f85dc4ed21dcf 2_2_1_7_D45_firmware.eff
f0d09ef1871e58d2625d592ef0782b2d 2_2_1_7_D50_firmware.eff
8fc62e57bd961f5d48f1a36dfce696de 2_2_1_7_D60_firmware.eff
8a187a3a78257fd770f259203fe75205 2_2_1_7_D62_firmware.eff
b10f44eafd9df306825c16f9a9eb6800 2_2_1_7_D65_firmware.eff
c3c72a826cf0ffe1b5add144b29ab5c0 2_2_1_7_D70_firmware.eff
1_3_2_3
April 25, 2017
Issues Resolved:
Address issues uncovered by AST-2017-002 and AST-2017-003
Ensure that phone returns to boot loader when it gets a config reset
If DCS provisioning arrives late in boot process, properly return to boot loader
Correct issue with audio when resuming a held three-way call
Correct issues with receiving phone configurations over slow links
Correct issue showing parking notifications for lots with more than 3 digits
New Features:
None
Improvements:
Allow UI to start without an account so that tech support dialog can be accessed
Allow firmware to match multiple version strings to smooth DCS deployment process
MD5 Sums
f155c1e905d1bb9fde468ceeed06d6c9 1_3_2_3_D80_firmware.eff
2_2_1_4
March 16, 2017
Issues Resolved
Correct restart issue when performing large numbers of un-subscribe / re-subscribe during PBX restart, all models
Correct startup issue when loading an extremely large number of contacts, all models
New Features:
Private Line Automatic Ringdown (PLAR) support has been added and is controlled using the plar_number account element, D6x models.
Control over the Status Bar label has been added using a new idle_company_text setting, D6x models.
Improvements
None
MD5 Sums
c839bca7ed9d20136d37fa40be49a406 2_2_1_4_D40_firmware.eff
f686510c10a62e652ac98989b0c3849e 2_2_1_4_D45_firmware.eff
99e6684783b69d2cc676b24182ae0a8c 2_2_1_4_D50_firmware.eff
9d8f94fef19179ab257df0cc22451668 2_2_1_4_D60_firmware.eff
ec223498fa006749dee14bde1ce66a61 2_2_1_4_D62_firmware.eff
7e0379400e4ab6d5dc2a2853fc74e31d 2_2_1_4_D65_firmware.eff
aedf5f471172f11458d8f8765d64c05f 2_2_1_4_D70_firmware.eff
1_3_2
March 13, 2017
Issues Resolved:
Correct issue accessing phone apps when SIP account password is null
Correct issue hiding Send to VM button on incoming call card when permission is disabled
Correct issue hiding Ignore button on incoming call card when permission is disabled
Correct issues with voicemail password in situations with certain password configurations
Correct issue with provisioning when DPMA userlist_auth is set to globalpin
Correct timing issues with displaying user presence in the Nav Menu
New Features:
Support send486 (send_dnd) call reject features for configured presence types
Improvements:
Change color setting for disabled preferences items in Nav Menu
MD5 Sums
18a5235174c7ffe2b4af9221c685c5b5 1_3_2_D80_firmware.eff
1_3_1
March 10, 2017
Issues Resolved:
Correct boot issues if locale is not in the proper format
Correct issues with locale loss during firmware upgrade
Correct various issues with startup and reconfigure
Correct issue with favorites display during quick reconfigure process
Correct contact search logic for certain names
Correct DPMA issues transferring ringing call directly to a contact’s voicemail
Correct issues interpreting scroll as a touch that could result in minimizing the call cards
New Features:
Support DPMA lock_preferences setting by disguising locked preferences in Navigation Drawer
Support DPMA's unavailable presence option
Improvements:
Update copyright statement for current year
MD5 Sums
da9e50e133c0611832a4e656ba7dfb88 1_3_1_D80_firmware.eff
2_2_1_3
March 3, 2017
Issues Resolved:
Correct issue causing call bridge when multiple auto-answer calls are received before any can be fully answered, all models
Correct issue preventing inbound calls with unmatched To: from being evaluated based on Request line, all models
Correct issues with certain Bluetooth headsets taking the phone off-hook immediately after connect, D65 model
Correct issue with MWI resubscribe after NOTIFY terminate/probation
New Features:
None
Improvements:
Remove non-functional add contact button from Contacts app in DPMA mode, all models
MD5 Sums
7d183c6824c2437e68e601dec77627ec 2_2_1_3_D40_firmware.eff
97da806841b4e666d8994aa9c20fc6a2 2_2_1_3_D45_firmware.eff
56052da010c37280e81837a049b32375 2_2_1_3_D50_firmware.eff
4c784a23c1d8dc07851dbec847ac7d77 2_2_1_3_D60_firmware.eff
735dce80ef64fb64d7160775bd26bc10 2_2_1_3_D62_firmware.eff
f2825e80f407f1a72b89b9c674fa83c9 2_2_1_3_D65_firmware.eff
bb63084a1e0cedfb868578cb22feaf8c 2_2_1_3_D70_firmware.eff
1_3_0
February 22, 2017
Issues Resolved:
Correct numerous issues with disabling Voicemail application
Correct numerous issues with disabling Contacts application
Correct issue with answering voicemail screening calls prior to screening them
Correct issue playing back non-US tones
Correct issue playing back long custom ringtones
Correct numerous issues with placing conference calls on hold
Correct numerous issues with 3-way call participants dropping before the call is torn down
Correct issues supporting User+PIN configuration mode
Correct numerous issues with manipulating voicemails too quickly
Correct issues processing configs without a valid “any network” while on a VLAN
Correct issues with retrieving firmware over slow links
Stop voicemail playback when navigating away from a folder or back or between voicemails
Correct issue displaying record button during conference calls
Correct issue obscuring last digits in keypad
Correct issue that caused Full-Screen Favorites app to timeout to idle
Correct issue that caused Full-Screen Favorites app to background when returning from Dream mode
Correct issues toggling keypad that caused apps to background
Correct issue that ignored brightness when auto-returning to idle
Correct issue with favorites drawer being obscured by toolbar
Correct “flash” issue when showing recall button on keypad
Correct issue with idle timer returning home during active calls
Correct issue with presence updates overriding the unregistered icon
Correct issue with improperly scaling idle screen logos
Correct issue with removing idle logo and returning to default wallpaper
Correct issues with gains and EC on Headset devices
New Features:
Allow phone to properly dial voicemail extension when visual voicemail is disabled
Handle server-supplied locale settings for tones, date formatting and clock formatting
Provide user control over phone timezone
Add support for voicemail forwarding
Add support for moving voicemails between mailboxes
Add support for “sip:proxy@host” DHCP Boot66
Improvements:
Add title and descriptions for reboots to improve user experience
Allow on-hook dial strings up to 99 digits
Format on-screen toast messages and move them to the top of the screen to prevent interference with on-screen settings
Improve behavior of sliders in Display Settings
Improve numerous icons
Improve numerous modal window formatting
Add blank state for favorites drawer
Improve performance of keypad
MD5 Sums
baa829f4b7ec9f9a07d58e8fd9b8136e 1_3_0_D80_firmware.eff
1_2_2_1
January 25, 2017
Issues Resolved:
Correct issue with erroneous touch sound event
Correct issue with inconsistent dream mode timeouts
Correct issues with VLAN discovery mode, particularly changes requiring manual reboot
Correct issue with Call Recording permissions failures
Correct issue when dialing contacts with no primary action
Correct issue with transfers of inbound, unanswered calls to a newly dialed outbound call
Correct issues with User/PIN mode
Correct issue with changes to Rapid Dial transfer type requiring manual reboot
Prevent phone from restarting when receiving improper UDP packets
Correct issue that prevented Call Recordings from being started and stopped
Correct issues with provisioning while DNS is unresponsive
Correct issue preventing backlight dimming element in UI from being saved across reboots
Correct issues when parsing configs that included VLAN assignments
Prevent phone from wiping out configuration after it has been stolen by another phone/extension.
Correct issue playing congestion tone when 603 Declines are received
Correct issues with tech support connection timeouts
Prevent Fax voicemail folders from showing in the voicemail folder list
Correct issue that caused failed transfers to hang up calls
Correct issue that showed Parking in the absence of a defined, default lot
Correct issue with using proper ringtone in the absence of a defined active ringtone
Correct connected line updates during early state
Correct issues with voicemail when manipulating items in folders other than INBOX
Prevent failures to parse Rapid Dial favorites entries from halting the load of all Rapid Dial favorites
Correct a crash issue on reconfigure
Correct issue with server-assigned MAC-based configuration
Correct issue with LLDP assignment when dealing with switches that only send MED packets at long intervals
Prevent server-initiated configuration updates from changing the brightness of Dream Mode
Correct issue with losing call cards when navigating to tech support modal
Correct issues with call conference complete button highlights in certain cases
Prevent contacts without a presence from showing a presence icon
Correct issue when canceling an attended transfer that caused targets to continue to ring
Correct position of complete and dial buttons on transfer state keypad to match other phone models
Correct issue clearing the call record button when call recording fails
Correct issue with blond transfer when source is still in the incoming state
Correct issue with transfer modal remaining when source has disconnected itself
Correct issue with contacts search query being cleared when exiting a contact details page
Correct issues with erroneously showing recall button on keypad
Correct issue with contacts search keyboard obscuring search results
Correct issue with accessing voicemail items that are no longer in the list
Correct call log issue that could overlap number and timestamp fields
Correct issues with call banner hold and end controls in transfer and conference states
Prevent missed call card from showing more than two lines of a caller name
Correct issue with changed brightness taking many seconds to activate
Correct issue with about dialog displaying updated IP addresses with late assignment
Correct issue that allowed “Keep Current” in bootconfig even if no current config was available
Correct issue when ending local call after the far end has already disconnected the call
Correct issue with double-tapping favorites entries creating two calls
Correct issues with scroll-click events
Correct issue with voicemail folder message counts
Correct issue with missed calls showing as active
New Features:
Add voicemail screening and pickup
Add full-screen favorites application
Add right-side favorites drawer
Add long-press capability to favorites
Add a more stylish webpage disabled page to the web server
Improvements:
Increase size of favorites to improve touch accuracy
Show redial button on keypad when redial buffer is populated
Update boot animation
Limit Dream Mode brightness in order to reduce power consumption during idle periods
Prefer name to extension in voicemail notification cards
Remove leading zero in call timer for calls at less than 10 minutes duration
Update on-call card function button locations to match mobile clients
Update many icons, application layouts and modal stylings
Restore keyboard when returning to contacts search list from a contact details page
Prefer the active call to other call states when displaying call details in the call banner
Sort the list of Digium Configuration servers in the boot config alphabetically
Show INBOX by default in Voicemail app
Adjust gain, AEC and NLP settings
MD5 Sums
2aa06178944e23af039b96308268a0c7 1_2_2_1_D80_firmware.eff
2_2_1_2
February 23, 2017
Issues Resolved:
Address issues with installing Javascript apps using the web UI when app development is enabled for all models
Address additional issues with pre-fill of old host/port in bootconfig for all models
New Features:
None
Improvements:
Support forthcoming Switchvox 6.4 improvements for all models
Better handle timeouts that can occur on very slow networks for all models
Check for duplicate IP addresses after DHCP, send DHCPDECLINE to server if duplicate discovered for all models
Improve softkey icons scan lines for bright wallpaper appearances on D6x models
MD5 Sums
4a7c7944d9bc6d800641470fc4bafde9 2_2_1_2_D40_firmware.eff
fc804ee3c244b9e752a337cae2b252a3 2_2_1_2_D45_firmware.eff
7523af10d2ffa3a61d65fbc261c0a1d7 2_2_1_2_D50_firmware.eff
dc2a01f9d7bf4bf6736cb242b82fe325 2_2_1_2_D60_firmware.eff
695057b60718e216b1136f8609778f53 2_2_1_2_D62_firmware.eff
705f751108df1982ed44b89a5c6074de 2_2_1_2_D65_firmware.eff
fa812d04b43772102c42a9ce0cd080e0 2_2_1_2_D70_firmware.eff
2_2_1_1
January 12, 2017
Issues Resolved:
Idle screen logo dimensions reported by web UI were incorrect for D6x models. Incorrect dimensions were 205x85 pixels. Correct dimensions are 296x128 pixels.
Web UI showed broken image for default idle screen logo rather than "No Image" for D6x models. D6x models use a large clock by default and not a logo.
Russian language was improperly capitalized in web UI for all models.
New Zealand flag was missing in web UI for all models.
use_secure_labels did not operate correctly for XML-config fetching for all models.
Certain blind and blond transfers could leave the phone in a connected state for all models.
Primary DNS failover to secondary server was unreliable in some cases on all models.
When reconfiguring a phone that previously had a proxy host entered, the proxy host would fill in the port field in the boot configuration menu; D40, D45, D50 and D70 models only.
New Features:
Wallpaper support using new wallpaper_file setting, D6x models only.
VPN connectivity using OpenVPN, controlled by new network_default_enable_openvpn, openvpn_root_cert, openvpn_client_cert, openvpn_client_key, and openvpn_config_file settings, D6x models only.
New setting to enable smaller clock display, small_clock, D6x models only.
RFC 3326 support for "Call completed elsewhere" SIP Reason has been added and is controlled using hide_completed_elsewhere option, disabled (show calls) by default, all models.
MD5 Sums
7aceb22c23c1fff59ec726d2abb54b0a 2_2_1_1_D40_firmware.eff
7c3b6805bf5aac2e8db8e4068393df5f 2_2_1_1_D45_firmware.eff
e32a553ecb60f9212d58f954427779f3 2_2_1_1_D50_firmware.eff
cd95b537209a0a1131fe756e357c561b 2_2_1_1_D60_firmware.eff
1a4da4f66c8f13b8b5d1be60170586b9 2_2_1_1_D62_firmware.eff
2bbb6789ab36cfca8382780b76b6518d 2_2_1_1_D65_firmware.eff
a5fce4b5f5a34d3df93990f620f88d46 2_2_1_1_D70_firmware.eff
1_0_3
November 8, 2016
Initial manufacturing release for D80 model phones.
MD5 Sums
f79f8e8dd84e811804ee57be12d6d478 1_0_3_D80_firmware.eff
2_2_0_8
November 18, 2016
Issues Resolved:
Call soft key events are no longer blocked during phone screen configuration updating messages, D6x models only
Parking IVR calls no longer results in an orphaned call handle, all models
Certain boot messages were not being processed correctly, all models
Bluetooth interoperability improvements, D65 model only
Dial options in the contacts app are shown during assisted transfer if the call is not ringing, all models
If Multicast was turned off via a config event, the listener is now torn down properly, all models
The large "day, date" display now follows the locale settings properly, D6x models only
With the addition of newer SIP software and new codecs, the MTU size of INVITE packets could exceed 1500 bytes, impairing the ability of the phone to work across routers. To reduce MTU size, several codecs have been disabled by default, including G.722.1 and G.722.1C licensed by Polycom, Opus, iLBC and the Linear 16 codecs. Beginning with this firmware release, these codecs must be enabled to be used. This affects all models of phones - non-D6x models only disable Linear 16 by default. Switchvox users are unaffected as codec control is provided in the Admin Web UI of Switchvox. XML-configuration users will need to explicitly enable codecs in the XML itself. DPMA users wanting to use any of these codecs who upgrade to this firmware must also upgrade to DPMA 3.2.2 and utilize the new codecs phone control key in res_digium_phone.conf.
In DPMA and non-Switchvox environments, phones no longer show a non-functional "Add" button in the call log, D6x models only
New Features:
Rapid Dial Page Timeout, controlled with setting blf_page_return_timeout defaults, to 0, value is in seconds, D65 model only
Password entry screens for global pin, phone pin and for the admin pin are now protected by hyphen characters as they are keyed in, all models
New config setting use_secure_labels, defaults to 0, will, when enabled, disguise the fetched URL on boot and replace it with the word "server," all models
The user and password files on the fetch config from URL boot screen are now protected by hyphen characters as they are keyed in, all models
A phone restart button has been added to the phone's web UI tool, and can be accessed by authenticating with the phone's web password to http://[ip of phone]/cgi-bin/phone_restart.cgi , all models
Initial Russian localization, accessible via the ru_RU locale, D6x models only
Bluetooth icon replaces older Wireless Headset icon, D65 model only
New Zealand tones are now accessible via the en_NZ locale, all models
Phones will now identify themselves to LLDP neighbors as "model-MAC" rather than just "model," all models
D40, D45, D50 and D70 model phones now support all modes of 802.1X that have been supported by D6x models
D40, D45, D50 and D70 model phones now support server retry on failure to respond that has been supported by D6x models
MD5 Sums
31f8337153ff3ebca2b8add0eba10dac 2_2_0_8_D40_firmware.eff
e472094457e548090b23e333d78dc26a 2_2_0_8_D45_firmware.eff
bd21b5212ebc851c73155fa25031327b 2_2_0_8_D50_firmware.eff
95d907df9ba6fba72500de44d6201fd0 2_2_0_8_D60_firmware.eff
a047d12d3eb474a6f0265a7fa4ebb1a6 2_2_0_8_D62_firmware.eff
3916ddf954251ffb9115ad87a62028e7 2_2_0_8_D65_firmware.eff
33b988305a3c9f1dbedb93bd758dba03 2_2_0_8_D70_firmware.eff
2_2_0_5_00dd5ef
September 27, 2016
Issues Resolved:
Update SSL libraries to account for OCSP vulnerability
iLBC codec use no longer causes phone app restart in some cases
TLS transport select is no longer missing from web UI tool
New Features:
None
MD5 Sums
a99be827cc87a93e74a1056d334edaea 2_2_0_5_00dd5ef_D60_firmware.eff
b9e5e47f7a87c2f6c65c0daebcab03ac 2_2_0_5_00dd5ef_D62_firmware.eff
e79191452ebd047b875b557ab2e02a4b 2_2_0_5_00dd5ef_D65_firmware.eff
2_2_0_4_5a54ff2
September 23, 2016
Issues Resolved:
Correct issue with accepting certain CA certs for 802.1X
Turn down default backlight dimming to 2 after 60 seconds
Correct issue with disabling 802.1X authentication
Phone no longer sends null token strings to DPMA in certain situations
Resolve issue with failed remote restarts
Fix BT audio close/open race condition when toggling hold between two calls.
Phones no longer allow impossible BLF transfers to secondary lines
Correct issue with SIP accounts being saved using the phone's built-in UI
Phone no longer displays non-Headset and non-phone devices in list of discovered BT devices
Disable keypresses during "Config Updating..." process
Resolve failed authentication when using ttls-mschap and ttls-gts 802.1X methods
Resolve issue with apps show up in app screen even though they were removed from soft-keys
Local UDP signaling port no longer fails to respond to changes
UDP Keepalive option no longer requires a manual restart to enable
Allow Config Updating message on idle screen to persist for 5 seconds to handle long-running config updates
New Features:
Add a protocol field to the boot server input screen
Phones now support SDES encrypted RTP
Phones now support TLS, basic, no certificate presentation or authentication, signaling
Help text added to BT menu
Support for new codecs:
iLBC 30ms
G.722.1 Siren 7, licensed from Polycom®
G.722.1C Siren 14, licensed from Polycom®
Opus narrowband and wideband
MD5 Sums
7ecf4c4592f60b8b1fbec7358a3d01b8 2_2_0_4_5a54ff2_D60_firmware.eff
961c5d4f1912a3fbd4cb96d21b9a917b 2_2_0_4_5a54ff2_D62_firmware.eff
1087a2ffa336b4c4214398056fd22b8e 2_2_0_4_5a54ff2_D65_firmware.eff
2_2_0_0_81709
September 8, 2016
Issues Resolved:
Resolve issue with failed remote restarts
New Features:
None
MD5 Sums
a761063950084f9ec2c87cfd1076e889 2_2_0_0_81709_D40_firmware.eff
aa89194816ff73d786edc6117822181f 2_2_0_0_81709_D45_firmware.eff
94031096974af06330fe48b64af2294e 2_2_0_0_81709_D50_firmware.eff
c32e771d440e5f690bf9bb382c148fd5 2_2_0_0_81709_D70_firmware.eff
2_1_0_3_1_d8aff6e
August 3, 2016
Issues Resolved:
Correct issue with loading voicemail app after reboot
Minimize display of configuration updating notice while on idle screen
Phone now retries connection to DPMA/Switchvox after 30-second timer, if server didn't respond
Correct display of long Caller ID Names
Update display of default phone state in Contacts app to be less confusing
Phone now remembers state of BT operation from pervious boot
BT Audio is no longer disconnected from existing calls when an incoming call is ignored
Correct issue with starting up BT audio during call answer using headset button
Add Select and Back soft keys to Applications menu and Back button to main menu
Correct "select" soft key text translations in Bootconfig and Phone Menu network select screens
New Features:
Phones can now listen for and playback multicast RTP audio
Phones can now perform EAP-PEAPv0/MSCHAPv2 802.1X authentication
Phones can now perform EAP-TLS 802.1X authentication
Phones can now perform EAP-PEAPv0/EAP-GTC authentication
Phones can now perform EAP-TTLS/EAP-MSCHAPv2 authentication
Phones can now perform EAP-TTLS/EAP-GTC authentication
Phones can now provide 802.1X debugging for developers
MD5 sums
e93526cfa66e4d4a168d70c8f3bf2030 2_1_0_3_1_d8aff6e_D60_firmware.eff
48df4c0c1b3bad97387247a7c22d1eb7 2_1_0_3_1_d8aff6e_D62_firmware.eff
9e5f94889ce37616dd1d22fa71f6bc6a 2_1_0_3_1_d8aff6e_D65_firmware.eff
2_1_0_0_81296
August 3, 2016
Issues Resolved:
French translation of Park is now more correct
Update timezone data
New Features:
Phones can now listen for and playback multicast RTP audio
Phones can now perform EAP pass-through
Phones can now perform EAPOL auto-logoff
Phones can now perform EAP-MD5 802.1X authentication
MD5 Sums
55ef28a6b89705026a80a6a664415ff7 2_1_0_0_81296_D40_firmware.eff
c034fbe8f171406efd293f142c733c6a 2_1_0_0_81296_D45_firmware.eff
9b769e7cabe374d4499eeced65e9c8c0 2_1_0_0_81296_D50_firmware.eff
c5656828f92e925be8df98b8c8f2c292 2_1_0_0_81296_D70_firmware.eff
2_0_3_2_5517aa0
August 3, 2016
Issues Resolved:
Forward and Failover font color has been corrected
Correct display of voicemails in voicemail app
Use correct unregistered icon
Correct issue with volume hard keys during ringing state when ring_head_only is enabled
Correct display of large numbers of unread voicemails
Remove stray orange pixels from D65 page toast
Caller ID persists during calls to non-phone extensions on hold
Ensure all settings are current before applying new setting updates
Missing user part of URI no longer causes phone to print trailing characters in Caller ID
When configured via webconfig, properly display all built-in apps
New Features:
Phones can now perform EAP pass-through
Phones can now perform EAPOL auto-logoff
Phones can now perform EAP-MD5 802.1X authentication
MD5 sums
a2d412d5221f184c560aacbfae4757be 2_0_3_2_5517aa0_D60_firmware.eff
a1922d9e555e09cf70ed18ec291d1f2e 2_0_3_2_5517aa0_D62_firmware.eff
ee6050ce6fbd7d36353557f0482d81d9 2_0_3_2_5517aa0_D65_firmware.eff
2_0_3_0_9d03187
August 3, 2016
Initial manufacturing release for D60, D62 and D65 model phones.
MD5 sums
e53a3c71c29fefccb666ece95cf7a1c7 2_0_3_0_9d03187_D60_firmware.eff
7e1ec1807e67c8118d738ec7cc457b68 2_0_3_0_9d03187_D62_firmware.eff
7ec3ede3479e1a36fa4a7ace3f7880b5 2_0_3_0_9d03187_D65_firmware.eff
2_0_3_0_80014
July 27, 2016
Issues Resolved:
PC port now properly enters blocking mode when attached to same switch as LAN port
PAI Caller ID was not updated in all cases
Caller ID persists during calls to non-phone extensions on hold
Missing user part of URI no longer causes phone to print trailing characters in Caller ID
Properly parse Caller ID name when contacts are empty
New Features:
None
MD5 Sums
268d7dbd7b98378ad30e8d6d3839c03d 2_0_3_0_80014_D40_firmware.eff
dde2bdc16156c42d1f0c44c886c4977d 2_0_3_0_80014_D45_firmware.eff
1477375bfe8e55e9cd0ff753bb595a5f 2_0_3_0_80014_D50_firmware.eff
c9ded4f85410521b2cd9026146b14198 2_0_3_0_80014_D70_firmware.eff
2_0_2_0_78957
April 21, 2016
Issues Resolved:
Occasional parsing errors on dial plans
Correct Portuguese translation errors
Correct Italian translation errors
Empty XML no longer breaks contacts search
Phone properly plays ringing tone previews from the phone UI
Phone no longer restarts due to untimely use of DTMF while a call is proceeding
New Features:
Phone can now play ringing tone out the headset port, not out the loudspeaker
Add account attribute needMwiSubscription to allow turning off or on MWI subscription
MD5 Sums
9cbc8377c99fb2f7f7d5fa26fe3faf90 2_0_2_0_78957_D40_firmware.eff
04650586860e9940118091f4e58f74c2 2_0_2_0_78957_D45_firmware.eff
f497e4f557e7abe2dbe29454abbdac7f 2_0_2_0_78957_D50_firmware.eff
37e0983db382a54c18222d4d761e0233 2_0_2_0_78957_D70_firmware.eff
1_4_2_1_73372
May 14, 2015
Issues Resolved:
Address occasional phone state error during reconfigure or application use.
New Features:
None
MD5 Sums
fe843347502020614746cb236c6b5197 1_4_2_1_73372_D40_firmware.eff
83654200c4a62f43cc0ecfbe414b5ad7 1_4_2_1_73372_D45_firmware.eff
eea4e4ca075640d6752fcb4919fa1e9f 1_4_2_1_73372_D50_firmware.eff
59a246d8241c47b464ec2f2c5d826521 1_4_2_1_73372_D70_firmware.eff
1_4_2_0_63880
June 3, 2014
Issues Resolved:
An incoming call during a transfer no longer becomes the transfer target, which happened under particular circumstances.
Softkeys now display correctly when using the Voicemail app > > Details > More > Forward.
Transferring one call while another is incoming no longer stops the incoming call ringing when the transfer completes.
Digium Phone speaker light now correctly lights up when off-hook after using the Voicemail App under particular circumstances.
When Info is pressed while the phone is off-hook, followed by a Rapid Dial Key for a contact, the contact detail page now opens correctly.
New Features:
Progress indicator during firmware updates
New digium.updateXmlConfig() API to allow custom apps running on XML-Configured phones to request that the phone retrieve a config update
MD5 Sums
a092f00093aedea81c9649bd18a35b20 1_4_2_0_63880_D40_firmware.eff
5ecbd7b66fbbb448ff388e54ffc304a3 1_4_2_0_63880_D45_firmware.eff
dcfbbd8bd68cd5c0ddfc7b6651f1b440 1_4_2_0_63880_D50_firmware.eff
1908b1643a37d2b9e42bad73237f1016 1_4_2_0_63880_D70_firmware.eff
1_4_1_0_60822
March 17, 2014
Issues Resolved:
The Forward Calls app now correctly handles forwarding to numbers entered manually
Speaker light now resets properly when hanging up an active call to answer an incoming call.
All soft keys and feature buttons now function appropriately in the Contacts App when accessed via the Applications list in the Menu.
Searching in the Contacts app now allows correct dialing. This was sometimes interrupted by statuses changing for the phone's rapid dial contacts.
LLDP functionality has been modified for the HP A5210 switch. The phone no longer advertises "Extended Power via MDI-PSE in the LLDP packet.
Digits dialed before an incoming page are now cleared from the phone.
When receiving two calls at one time, selecting Send VM or Ignore no longer stops the other call from ringing.
The Call Log app now displays the primary account by default, even after dialing a secondary account's call.
Smart BLF items now load even if the phone's primary account cannot register
New Features:
The voicemail application can now require a password to be entered before loading
The Call Log and Call Forward applications can now be removed from the Applications menu
Call waiting tone can be disabled
Support model D45 telephone
MD5 Sums
80c4445084b0342dbae61a02f29a1600 1_4_1_0_60822_D40_firmware.eff
0ba129ef37841033152adea8b8d64efe 1_4_1_0_60822_D45_firmware.eff
ea3c52d6638212963fbfe21a27e7ec42 1_4_1_0_60822_D50_firmware.eff
b47aaf8bd37cf0ba7ebf7506ee0a2395 1_4_1_0_60822_D70_firmware.eff
1_4_0_0_57389
October 4, 2013
Issues Resolved:
Improve consistency of ringtone playback on state change of watched phones
Phone properly answers second incoming call with line key press
New Features:
The Contacts application has been improved to support actions, display rules, and to provide additional information about user presence
Rapid Dial keys have been enhanced with support for Smart BLF
Presence and Device Subscriptions are now configurable rather than limited to 40
UDP Keep-alive CRLF option for dealing with zealous NAT routers
MD5 Sums
b68e25be05d8ad678374397ff252fb6c 1_4_0_0_57389_D40_firmware.eff
f7402931f47bf8a86b8734489faa96c4 1_4_0_0_57389_D50_firmware.eff
352c0e3a46662a3c41d30207d6c77786 1_4_0_0_57389_D70_firmware.eff
1_3_3_0_55755
July 15, 2013
Issues Resolved:
The phone now accommodates certain Cisco switches and 'switchport mode trunk', a setting that could take a long time to negotiate the link with the Digium phones. This extra delay prevented the phone from acquiring LLDP-MED information.
Phone now looks at additional packets from the switch until it receives all the LLDP-MED settings. This accommodates certain Cisco switches (eg. Cisco SG500X) that do not send all the LLDP-MED policy settings on the first packet to the phone.
Phone now sends an LLDP packet with TTL of zero, to clear the cache on the switch so that it responds with the proper LLDP-MED settings.
MD5 Sums
9cbd293c9f15724f30ccf38311adc637 1_3_3_0_55755_D40_firmware.eff
7bc1f15e3154423c296d6ae3c2b4d827 1_3_3_0_55755_D50_firmware.eff
0da86e7c8e427ccd6098435ff9bff255 1_3_3_0_55755_D70_firmware.eff
1_3_2_0_54993
May 20, 2013
Issues Resolved:
When you adjust the call volume using the volume bar when using the handset, now the volume for the next call is reset to the default volume after you hang up.
Translations have been corrected for "reset volume" and "updating firmware" in French, and "Info" in Spanish.
To improve display, phone software was adjusted so account and voicemail lines on the Line Info screen only splits when line length exceeds the display width.
Text displays for Portuguese (PT) and Dutch (NL) languages now align properly.
Voicemail Message Playback in the Voicemail app will not stop if the listener switches from the handset to the speaker then back to the handset.
Local contacts are no longer lost when firmware is updated via the phone's web interface.
New Features:
PC Port Mode and LAN Port Mode, which set the speed and duplex mode for LAN and PC Ports. These default to Auto, which lets the switch determine the speed.
PC Port VLAN settings, which set the VLAN ID and priority for the PC that is plugged into the phone. The default is to not send VLAN information to the PC. Having these specific settings ensures that active calls are not interrupted by changes to the PC.
MD5 Sums
b98fa1648b21543e8f92c8b0d0fab74b 1_3_2_0_54993_D40_firmware.eff
2aee10f06753b91dc923f8756384459d 1_3_2_0_54993_D50_firmware.eff
27a052b0cb65d1a4f1ea9faf6340626b 1_3_2_0_54993_D70_firmware.eff
1_3_0_2_54153
April 3, 2013
Phone's LLDP-MED broadcast no longer contains a power over ethernet requirement. Broadcasting that requirement caused Digium D70 phones to continually restart when connected to a particular network switch running a particular firmware version.
MD5 Sums
9d7bff17d34eddd94bce8d1eec6eeebd 1_3_0_2_54153_D40_firmware.eff
2ed954e3fb2906176acd4cdd54195930 1_3_0_2_54153_D50_firmware.eff
a4a6c8ca867d36e4f7df15340152aaee 1_3_0_2_54153_D70_firmware.eff
1_3_0_1_53901
March 20, 2013
Voicemail playback keys no longer reset under certain circumstances
MD5 Sums
bf9f77a8a82210e820c42147140e281d 1_3_0_1_53901_D40_firmware.eff
3582d610357ad27aaf980cf1f629bf2b 1_3_0_1_53901_D50_firmware.eff
ddd107b8176dbc45dda4ca858504f5f5 1_3_0_1_53901_D70_firmware.eff
1_3_0_0_53680
February 28, 2013
The terms of the End-User License Agreement For Digium Phone Software and Digium Phones have changed. Please review them as use of this firmware constitutes acceptance of the Agreement. The EULA can be viewed directly on your phone by visiting http://\[phone_ip_address\]/licensing
App Development Mode helps a developer write custom apps. For information about writing custom apps for your Digium Phones, visit the Digium Phone API Information Center site and Custom Phone Applications with Asterisk wiki page.
A selection of language/locales is now available, including Spanish, Italian, French, German, Portuguese, and Dutch. This selection affects the language displayed on the phone, the date and time display, and these tones: busy, dial tone, call-waiting beep, congestion (fast busy), and ringback. Also, you can select a 12-or 24-hour clock.
Additional QoS settings provide more networking options.
A new Electronic Hook Switch option lets you specify a Jabra IQ or Plantronics headset for EHS.
Phones can now be restarted by holding down multiple keys (7,5,3) simultaneously for 5 seconds.
LLDP with voice-signaling enabled is now managed correctly across all phone models (QoS settings have also changed).
Screenshots may be obtained from a phone by browsing to http://[phone ip]/cgi-bin/screen_shot?screen=main (all models) or http://[phone ip]/cgi-bin/screen_shot?screen=blf (D70 only)
MD5 Sums
6a6ab1f4fe5f1bf067a36f440989527d 1_3_0_0_53680_D40_firmware.eff
0c4f19358b212f480a68346e02119357 1_3_0_0_53680_D50_firmware.eff
8c2c4ad969b3f34d16a88a2410d968c3 1_3_0_0_53680_D70_firmware.eff
1_1_3_0_52406
January 7, 2013
All configuration changes now cause a restart only if necessary, and the restart is delayed until there are no active calls.
MD5 Sums
8e1ea1bf8146866f1c11d1bb6751034c 1_1_3_0_52406_D40_firmware.eff
50147ee6ab44a3c3637c8e5dcaaaf29b 1_1_3_0_52406_D50_firmware.eff
c241ef9c2b2e95ff5690b48e1186881b 1_1_3_0_52406_D70_firmware.eff
1_1_2_0_51236
December 7, 2012
Incoming calls can now be directly transferred (without answering) using one of the rapid dial keys without problems.
Active calls that are assisted transferred under particular circumstances no longer cause the screen to freeze.
Phones now connect properly when LLDP is used and configured with voice and voice-signaling LLDP-MED network policy.
MD5 Sums
f9b3ff8ad2c240c61bddc33eefb8c038 1_1_2_0_51236_D40_firmware.eff
cf8fb69fc8156d4079a6155494ae729e 1_1_2_0_51236_D50_firmware.eff
195f9edddd9ef99c02ee0b3b6b8eb60d 1_1_2_0_51236_D70_firmware.eff
1_1_1_0_49993
October 12, 2012
When a phone is starting, during steps 2 through 7, pressing *86 restores the phone to factory defaults.
The phone no longer restarts when a rapid dial key is pressed that has a contact with no phone number.
Searching Contacts now ignores special characters (for example, pressing 663455 finds contacts named O'Neill).
Reset to Factory Defaults now consistently resets the phone's Admin password to 789.
Volume levels have been slightly adjusted for the headset and handset.
MD5 Sums
58f36572a29c2129724d0e56bce01a7d 1_1_1_0_49993_D40_firmware.eff
25eb56ee9ad0e74913719bfe5572ce05 1_1_1_0_49993_D50_firmware.eff
6501682d52138035087eae850845feb3 1_1_1_0_49993_D70_firmware.eff
1_1_0_0_48178
August 2, 2012
Phones failover to the specified Alternate PBX Address if the primary PBX is not available.
EHS can be used with a Plantronic wireless headset
A Select Network tool lets you choose one of your Phone Networks, if necessary.
Phones check for SRV records in DNS.
Phones adjusted to extract alert-info elements from angle brackets.
Phones adjusted to transfer contacts, ringtones, and logos properly from ftp(s) hosts.
Phones adjusted to clear static IP settings after reconfigure attempts.
Phones adjusted so that DTMF tones are sent before a 200 OK is received.
MD5 Sums
2c5e62aef6ca443fe5ad318b78c35c49 1_1_0_0_48178_D40_firmware.eff
8fc6fa3db99f7aa291f4cc2b86265878 1_1_0_0_48178_D50_firmware.eff
65a2ad7e2f3e3a24e2e56d169f824d2f 1_1_0_0_48178_D70_firmware.eff
1_0_5_1_47270
June 22, 2012
The phone's web UI no longer incorrectly allows access with the default password, if in certain circumstances the application engine fails.
The phone now correctly rings audibly when handset answering mode is changed from yes to no.
MD5 Sums
858c646bc4113e8e1923bbe19865127c 1_0_5_1_47270_D40_firmware.eff
54db1281413a67c52d96d4461afaed55 1_0_5_1_47270_D50_firmware.eff
ad93eb63c1520599125d4b3cce571385 1_0_5_1_47270_D70_firmware.eff
1_0_5_46476
May 21, 2012
Phones using DHCP on a VLAN no longer incorrectly restart because of a reported IP address change.
Released for Asterisk users; includes 1_0_4_45906 changes.
MD5 Sums
834f917711e81bd7b1679f262f89ee6e 1_0_5_46476_D40_firmware.eff
a7e1f2b32df0a90c6655ecde8d496b1c 1_0_5_46476_D50_firmware.eff
e40d5b80117683e47120a5ed06719411 1_0_5_46476_D70_firmware.eff
1_0_4_45906
May 21, 2012
The phone now reboots when it detects that it's on a different network, and is idle.
The phone now assigns the VLAN QoS priority to RTP.
The "Reset Volume After Each Call" now behaves correctly under circumstances that previously caused the handset volume to be 0.
Not released for Asterisk users.
MD5 Sums
8a78b1042bb9a1e48e2da75b2df763db 1_0_4_45906_D40_firmware.eff
a873484ceec8661b396684a7e43ceaed 1_0_4_45906_D50_firmware.eff
09f642f8639fc4e574f4a370a9a3f1bc 1_0_4_45906_D70_firmware.eff
1_0_3_45441
April 3, 2012
With the phone offhook, pressing another line key now correctly switches to that line.
The Msgs button now behaves correctly while the phone is offhook.
The call-waiting tone now plays every 10 seconds (instead of just once).
Adding a call log item as a contact now behaves correctly after canceling out of that process.
Large call logs now load more quickly.
The phone no longer rings when a ring rule specifies visual-only.
The phone now plays the netbusy tone when you dial an invalid extension (503 service unavailable).
Local settings are now deleted when the phone is reconfigured by a server (Digium Configuration Server, or Fetch Configuration File).
Network Utilities now includes a list of mDNS services found by the phone.
MD5 Sums
7e5bc8607805b9789f35099eb73765d2 1_0_3_45441_D40_firmware.eff
1f406636f684155bb1bbaae98f72787b 1_0_3_45441_D50_firmware.eff
b9c680a6506c5b7fb711e9f50d2617e6 1_0_3_45441_D70_firmware.eff
1_0_0_44308
February 12, 2012
Initial release
MD5 Sums
75eb44c14f62bfeb641defad10ff0d35 1_0_0_44308_D40_firmware.eff
f95b36a7941433691a299e322bbaf082 1_0_0_44308_D50_firmware.eff
c32278465d524595841ca497388af4c9 1_0_0_44308_D70_firmware.eff